GE GTS18FBSWW Use and Care Manual - Page 15

Installation Instructions 4 REVERSING THE HARDWARE (CONT.) 4.2 Interchange hinge and screws at top right with screws at top left of cabinet. Do not tighten screws on hinge side at this time. 5 REVERSING THE DOOR HANDLES (CONT.) 5.1.4 Remove plug button from the top hinge hole on the left side of the door and insert it into the hole on the opposite side that was vacated by removal of the top hinge. Plug Button Installing the hinge on the left. Installing the hinge on the right. NOTES: • Some hinges have four holes. Which holes you use for installing the hinge depends on which side you install the hinge. • The outer edge of the hinge should be parallel to the edge of the case for correct installation. 5.1.5 Pull the plug button from the front of the door and transfer it to the opposite side. Plug Button To reattach the handle on the opposite side. 5 REVERSING THE DOOR HANDLES 5.1 Transfer fresh food door handle 5.1.1 Remove the handle plug using a tape-tipped putty knife under the edge, and remove the screw underneath. Remove the two screws holding the handle to the top of the door. Top 5.2 Transfer door stop 5.2.1 Move the metal or plastic door stop and screws from the right side to the left side. Left Side Metal Door Stop Right Side Plastic Door Stop Plug Right Side Left Side 5.1.2 Remove the handle. 5.1.3 Remove the screws from the right edge of the door top and insert them into the handle screw holes on the opposite side. Screws for Handle Holes 5.3 Reinstall the fresh food door handle 5.3.1 Attach the handle to the right side of the door with screws at the top and under the handle plug. 5.3.2 Reinstall the handle plug. 15