GE GTS21FSKSS Use and Care Manual - Page 12

Re-hanging The Doors Cont., Re-hanging The Doors

Page 12 highlights

INSTALLATION INSTRUCTIONS Installation Instructions REVERSING THE DOOR SWING (CONT.) RE-HANGING THE DOORS 1. L ower the fresh food door onto the bottom hinge pin. Be sure the washer is in place on the pin. Plastic Washer 2. T ilt the door towards the Hinge cabinet. As the door is Pin brought into position, align the socket in the door with the hole in the center hinge. Place the center hinge pin into the hole in the center hinge and tighten. Make sure the washer is on the top of the hinge pin. Hinge Pin with Washer Center Hinge RE-HANGING THE DOORS (Cont.) 3. L ower the freezer door onto the center hinge pin. Be sure the washer is in place on the pin. 4. T ilt the door towards the cabinet. Install the top hinge fitting the pin Hinge into the socket on the Pin top of the door. Plastic Washer 5. M ake sure the door is slightly above the top of the cabinet and the gap between the doors is even across the front. Tighten the top hinge screws. Do not over-tighten these screws. Tighten them until they are just snug, and then turn them another one-half turn. 6. R eplace the top hinge cover. Top Hinge Cover Top Hinge Center Hinge Gap 12 49-60761

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

12
49-60761
RE-HANGING THE DOORS (Cont.)
3.
Lower the freezer door
onto the center hinge
pin. Be sure the washer
is in place on the pin.
4.
Tilt the door towards
the cabinet. Install the
top hinge fitting the pin
into the socket on the
top of the door.
5.
Make sure the door is slightly above the top of the
cabinet and the gap between the doors is even
across the front. Tighten the top hinge screws. Do
not over-tighten these screws. Tighten them until
they are just snug, and then turn them another
one-half turn.
6.
Replace the top hinge cover.
Installation Instructions
INSTALLATION INSTRUCTIONS
REVERSING THE DOOR SWING (CONT.)
Top
Hinge
Top Hinge
Cover
Center
Hinge
Gap
RE-HANGING THE DOORS
1.
Lower the fresh food
door onto the bottom
hinge pin. Be sure the
washer is in place on
the pin.
2.
Tilt the door towards the
cabinet. As the door is
brought into position,
align the socket in the
door with the hole in the
center hinge. Place the
center hinge pin into the hole in the center hinge
and tighten. Make sure the washer is on the top of
the hinge pin.
Hinge
Pin with
Washer
Center
Hinge
Plastic
Washer
Hinge
Pin
Hinge
Pin
Plastic
Washer