GE JGSP28DENWW Quick Specs - Page 1

interference with drawer JGSP28DEN 3" 15" GE® 30" Slide-In Gas Range with Self-Cleaning Ove1n2" 29-15/16" min. 30-1/16" max. Dimensions and Installation Information (in inches) Rear filler strip or backguard are available for these ranges Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating. Optional Kits for Slide-In Gas Ranges: (Available at additional cost) Lower/Side Trim Kits JXS56WW - Lower Trim Kit (White) JXS56BB - Lower Trim Kit (Black) Accessory Backguards JXS32BB - Black Accessory Backguard JXS37BB - Black Glass Accessory Backguard JXS32WW - White Accessory Backguard JXS37WW - White Glass Accessory Backguard JXS37CC - Bisque Accessory Backguard Rear Filler Strip WB07T10680 - Black Filler Strip Assembly WB07T10681 - White Filler Strip Assembly WB07T10682 - Bisque Filler Strip Assembly Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. to top of drawer 7" Acceptable Gas Line & Electrical Outlet Area Follow instructions packaged with alternate appliance 30" min. 6" min. from walls For optimum installation these surfaces must be flat and level 24" min. 23-3/16" 30" min. from cooking surface to bottom of overhead cabinets 13" max. 18" min. vertical distance depth from the bottom of the adjacent overhead cabinets 35-7/8"-38" from floor to countertop Max. depth of cord, plug, recept. box & gas hookup 3.5" to prevent interference with drawer Countertop depth 25" (typical) 1-1/4" min. countertop to top of drawer 3" 15" 12" 29-15/16" min. 30-1/16" max. 7" Acceptable Gas Line & Electrical Outlet Area Counter Cutout Dimensions (in inches) If you are NOT using the optional Filler or Backguard: If you are using the optional Filler or Backguard: 23-3/16 30 All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. 25 30 Listed by Underwriters Laboratories R Specification Revised 7/09 330231