GE JGSP28SENSS Use and Care Manual - Page 30
Troubleshooting Tips
UPC - 084691179986
View all GE JGSP28SENSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Before you call for service... Troubleshooting Tips Problem Display flashes "bAd" then "linE" with a loud tone Control signals after entering cooking time or start time Display goes blank Display flashes Unable to get the display to show "SF" Power outage, clock flashes "Burning" or "oily" odor emitting from the vent Strong odor Fan noise Possible Causes The installed connection from the house to the unit is miswired. You forgot to enter a bake temperature or cleaning time. A fuse in your home may be blown or the circuit breaker tripped. The clock is in black-out mode. Power failure. Oven control pads were not touched properly. Power outage or surge. This is normal in a new oven and will disappear in time. An odor from the insulation around the inside of the oven is normal for the first few times the oven is used. A cooling fan may automatically turn on and off. What To Do • Contact installer or electrician to correct miswire. • Touch the BAKE pad and desired temperature or the SELF CLEAN pad and desired clean time. • Replace the fuse or reset the circuit breaker. • See the Using the clock and timer section. • Reset the clock. • The BROIL HI/LO and BAKE pads must be touched at the same time and held for 3 seconds. • Reset the clock. If the oven was in use, you must reset it by touching the CLEAR/OFF pad, setting the clock and resetting any cooking function. • To speed the process, set a self-clean cycle for a minimum of 3 hours. See the Using the self-cleaning oven section. • This is temporary. • This is normal. The cooling fan will turn off and on to cool internal parts. It may run after the oven is turned OFF. 30