GE JNM7196SFSS Installation Instructions - Page 12
Caution
View all GE JNM7196SFSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Instructions A 2876,'(723(;+$867 9HUWLFDO'XFW ,167$//$7,2129(59,(: A1. Attach Mounting Plate to Wall A2. Prepare Top Cabinet A3. Install Adaptor A4. Mount Oven A5. Adjust Exhaust Adaptor A6. Connect Ductwork A1 ATTACH THE MOUNTING PLATE TO THE WALL A B 7RXVHWRJJOHEROWV: Mounting Plate Spacing for Toggles More Than Wall Thickness Toggle Wings Toggle Bolt C D Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud. Recommended locations on the mounting plate are indicated by A, B, C and D. 1 Remove the toggle wings from the bolts. 2 Insert the bolts into the mounting plate through the holes designated to go into drywall and reattach the toggle wings to 3ø4s onto each bolt. 12 Wall Bolt End 3 Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate. NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting plate touch the bottom of the cabinet when pushed flush against the wall and that the plate is properly centered under the cabinet. CAUTION: %HFDUHIXOWRDYRLGSLQFKLQJ ILQJHUVEHWZHHQWKHEDFNRIWKHPRXQWLQJSODWHDQG the wall. 4 Tighten all bolts. Pull the plate away from the wall to help tighten the bolts.