GE JVM1750SPSS Use and Care Manual - Page 38

Helpful Information Light Bulb Replacement Cooktop Light/ Night Light Replace the burned-out bulb with a 120 volt, 40-watt incandescent bulb (WB36X10003), available from your GE supplier. 1 To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug. 2 Remove the screw at the left of the light cover and lower the cover. 3 Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by gently turning. Replace with the same size and type bulb. 4 Replace the screw. Connect electrical power to the oven. Remove screw Oven Light Replace the burned-out bulb with a 120 volt, 40-watt incandescent bulb (WB36X10003), available from your GE supplier. 1 To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug. 2 To remove the top grille, open the door and remove the 3 screws on top of the oven that hold the grille into place. Slide the grille to the left to remove it. Screws 3 Lift the metal tab on the light cover located above the handle. 4 After breaking the adhesive seal, remove the bulb by gently turning. Replace with the same size and type bulb. Filter housing Light cover 5 Replace the light cover. 6 Replace the grille and screws. Connect electrical 38 power to the oven.