GE PDT825SSJSS Installation Instructions - Page 15

Dishwasher Installation STEP 22: POSITION SOUND INSULATION PIECE (on some models) • Locate the sound insulation package inside the dishwasher. • Stand the parts upright as shown. Dishwasher Door STEP 23: REPLACE TOEKICK • Place toekick against the legs of the dishwasher. Toekick Figure AF • Locate the control box. Insulation Block (On some models.) Control Box Figure AG • Push insulation block portion under the dishwasher until it is beneath the control box. Figure AH • Push the panel portion up to the front of the block. (on some models) Push the sides of the insulation behind the toekick attachment screw holes • Tuck the sides of the front panel behind the toekick attachment screw holes. • Open door all the way, if the door doesn't stay fully open, DGMXVWWKHLQVXODWLRQSDQHO • Align the screw holes with the screw holes on the legs of the dishwasher. • Ensure vent opening is not blocked by insulation. Vent opening Location and appearance will vary Figure AH Toekick Attachment Screws • Align the toekick with the bottom edge and make sure it is DJDLQVWWKHÀRRU • Insert and tighten the 2 toekick attachment screws. The WRHNLFNVKRXOGVWD\LQFRQWDFWZLWKWKHÀRRU Tip: Reduce sound from under the dishwasher. Make sure toekick is against floor. STEP 24: CHECK THE FOLLOWING • Tub trim does not interfere with the door • Dishwasher is square and level at both the top and bottom of the cabinet opening, with no twisting or distortion of the tub or door ‡$OOOHJVRIWKHGLVKZDVKHUDUH¿UPO\LQFRQWDFWZLWKWKHÀRRU • Drain hose is not pinched between the dishwasher and DGMDFHQWFDELQHWVRUZDOOV ‡7XEWULPLVIXOO\VHDWHGRQWKHWXEÀDQJH STEP 25: LITERATURE • Be sure to leave complete literature package, these Installation Instructions and product samples and/or coupons with the consumer. 15