GE PFSF2MJY Owners Manual - Page 26
REHANG REFRIGERATOR DOOR, INSTALL THE LOGO BADGE, cont., is even across the front. While holding
View all GE PFSF2MJY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installation Instructions REVERSING THE DOOR SWING (cont.) 6 REHANG REFRIGERATOR DOOR A Lower the refrigerator door onto the center hinge pin. Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located in the bottom of the door. 7 INSTALL THE LOGO BADGE Remove the adhesive backing paper and align the pins on the back of the badge with the holes in the door. Apply pressure to the badge to ensure it sticks to the door. B Insert the door thimble into the hinge hole on top of the refrigerator door and then insert the top hinge pin. Make sure the door is aligned with the cabinet. Attach the hinge to the top of the cabinet loosely with the bolts. C Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge bolts. Replace the hinge cover. 26