GE PS950SFSS Quick Specs - Page 1

PS950SF PS950SF GE Profile™ Series 30" Slide-In Double Oven Electric Convection Range Dimensions and Installation Information (in inches) Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range F installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall. Note: This appliance has been approved for 0" spacing to adjacent surfaces above the cooktop. However, a 6" minimum spacing to surfaces less than 15" above the cooktop and adjacent cabinet is recommended to reduce exposure to steam, grease splatter and heat. Installation information: Before installing, consult installation instructions for current dimensional data and additional requirements. KW Rating 240V 15.2 208V 11.4 Breaker Size 240V 40 Amps† 208V 40 Amps† †Note: Check local codes for required breaker size. 297⁄8" 311⁄4" 297⁄8" NOTE: Use a 4' power cord to prevent interference 371⁄4" with unit when installing. 36" 257⁄8" *287⁄8" 451⁄8" NOTE C B C Both Sides Use a 4' power cord to prevent interference when installing. *Depth including door handle is approximately 28-7/8". A A For answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. B C * *ADA qualified based on Uniform Federal Accessibility Standards All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories MINIMUM DIMSEpNeScIOiNfiScBaEtTiWonEENCCrOeOaKtTeOdP,5W/A1L3LS AND ABOV2E2T0H4E5C8OOKTOP: A. Make sure the wall covering, countertop, ooring and cabinets around the range c the range.