GE PS968SPSS Quick Specs
GE PS968SPSS - Profile - 30" Electric Range Manual
 |
UPC - 084691197546
View all GE PS968SPSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE PS968SPSS manual content summary:
- GE PS968SPSS | Quick Specs - Page 1
30 PS968SP GE Profile™ 30" Slide-In Electric Range Dimensions and Installation Information (in inches) KW Rating Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating. 240V 12.4 Note: To reduce the possibility of scorching the side - GE PS968SPSS | Quick Specs - Page 2
8 6 4 PS968SP GE Profile™ 30" Slide-In Electric Range Features and Benefits • PreciseAir™ Convection System - A reversing fan circulates heat and air for evenly browned and baked foods • Convection Bake - This setting is optimal for baking casseroles or lasagnas, yeast breads, pies and pizzas
-
1 -
2
 |
 |
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
PS968SP
GE Profile
™
30" Slide-In Electric Range
Specification Created 5/09
220447
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Listed by
Underwriters
Laboratories
Dimensions and Installation Information (in inches)
Note:
Cabinets installed adjacent to slide-in ranges must have an adhesion
spec of at least 194° temperature rating.
Note:
To reduce the possibility of scorching the side walls above the countertop
when no load is present on burners, it is recommended that a minimum 6"
spacing from adjacent side wall be allowed for possible extended high-heat
element operation.
Receptacle Locations:
For all 30" Slide-In Ranges locally approved flexible
service cord or conduit must be used because terminals are not accessible
after range installation.
See shaded area in drawing for location of electrical
outlet box. Recommended
outlet locations allow range to be installed directly against rear wall.
KW Rating
240V
12.4
208V
9.3
Breaker Size
240V
40 Amps
208V
40 Amps
Installation information:
Before installing, consult installation instructions
packed with product for current dimensional data.
Optional Kits For Slide-In
Electric Ranges
(Available At Additional Cost)
Accessory Backguards
(Attaches to the back of range
as a backguard when unit is
installed in 30" free-standing
cutout)
JXS32SS (Stainless) - 4" High
JXS32WW (White) - 4" High
JXS32BB (Black) - 4" High
JXS37WW (White) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37BB (Black) - 5-1/4" High
Body Sides
(Slide-in ranges are sold
without sides installed. Can
be installed on either left
or right when unit has one
exposed side [no cabinet
adjacent]. Kit contains
1 body side)
JXS77WW (White)
JXS77BB (Black)
Rear Filler Strips
WB07T10680 - Black Filler
Strip Assembly
Optional Lower Trim Kits
(If counter height is greater
than 36.5", a lower trim kit
is recommended to extend
the useful height to 38"
maximum)
JXS56WW – White
JXS56BB – Black
23-3/16
30
If you are NOT using the
Filler strip or Backguard:
30
If you are using the
Filler strip or Backguard:
25
Acceptable
Electrical
Outlet Area
30" Min.
30" Min.
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
Excluding Models JSS28 and JSP39
Recommended
6" Min.
From Walls
23-3/16
15" Min.
13" Max.
2-1/2
30
25
9/16
7-1/2
2-1/2
35-7/8"–38"
from floor to
countertop
2-7/8"
To Front
Surface Of
Countertop
20-5/8" Door
Clearance
From Front
Surface of
Countertop
31-1/4
30
25-3/4**
A/B*
Accessory
Backguard
24
36-1/4
*JXS37 is 5-
(excluding handle)