GE PSCF3RGXWW Quick Specs - Page 2

GE Profile, Counter-Depth 23.3 Cu. Ft. Side-by-Side Refrigerator - profile refrigerator

Page 2 highlights

PSCF3RGX GE Profile™ Counter-Depth 23.3 Cu. Ft. Side-by-Side Refrigerator FOR 24 CUBIC FOOT MODELS Dimensions and Installation Information (in inches) Installation Tips to Maximize the Built-In Look • All wall/floor molding should be removed prior to installation. • Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4" diameter water line tubing recommended. • When possible, recess both copper water line and electrical outlet. (See local codes) 24" Cabinet Water Electrical 3/4" Airspace (1/2" Gap + 1/4" Wall Plates) 25" Counter Top 12" Soffit 24" Cabinet 8' Ceiling Water Electrical 3/4" Airspace (1/2" Gap + 1/4" Wall Plates) 13" to 14" Cabinet 25" Counter Top • Front and rear leveling legs are adjustable for the built-in look. (See owner's manual) *The rough-in dimensions of 70" for 23 cu. ft. models and 721/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position. Trim Fig 2A eps 70"*† 23 cu. ft. models 72-1/2"* 25 cu. ft. models †Model PSDW3YGX is 71-3/4" 24-1/2" For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. 36-1/8" *The rough-in dimensions of 70" for 23 cu. ft. models and 72-1/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refridgerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow additional clearance between cabinet doors and top of refridgerator trim when cabinet doors are in open position. †Model PSDW3YGX is 71-3/4". Listed by Underwriters Laboratories Specification Revised 5/08 Collar Trim In. w/ceiling 210298

  • 1
  • 2
  • 3

For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Installation Tips to Maximize the Built-In Look
• All wall/floor molding should be removed prior to installation.
• Water recess on rear wall recommended to prevent water
line damage. 48" minimum length, 1/4" diameter water
line tubing recommended.
• When possible, recess both copper water line and electrical
outlet. (See local codes)
• Front and rear leveling legs are adjustable for the built-in look.
(See owner’s manual)
*The rough-in dimensions of 70" for 23 cu. ft. models and 72-
1/2" for 25 cu. ft. models are minimum and measured from
the finished floor to top of opening (or the underside of the
overhead cabinets). For Models with Trim Kit: If frameless style
cabinets are planned for above the refrigerator, you may need
to consider adding a maximum of 1/4" (70-1/4") to height of
opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft.
models to allow for additional clearance between the cabinet
doors and the top of refrigerator trim when the cabinet doors
are in open position.
†Model PSDW3YGX is 71-3/4"
25"
Counter
Top
Electrical
Water
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
8' Ceiling
13" to 14"
Cabinet
12"
Soffit
36-1/8"
24-1/2"
70"*†
23 cu. ft. models
72-1/2"*
25 cu. ft. models
PSCF3RGX
GE Profile
Counter-Depth 23.3 Cu. Ft. Side-by-Side Refrigerator
Specification Revised 5/08
210298
Listed by
Underwriters
Laboratories
Dimensions and Installation Information (in inches)