GE PSDS5YGXSS Installation Instructions - Page 24
Installation Instructions, MOVING THE REFRIGERATOR, ONTO A HAND TRUCK, REMOVE THE BASE GRILLE
UPC - 084691167617
View all GE PSDS5YGXSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Instructions MOVING THE REFRIGERATOR 1 LOADING THE RERIGERATOR ONTO A HAND TRUCK Leave all tape and door pads on doors until the refrigerator is in its final location. To move the refrigerator, use a padded hand truck. Center the refrigerator on the hand truck and secure the strap around the refrigerator. DO NOT OVERTIGHTEN THE STRAP. If the refrigerator must go through any entrance that is less than 38″ wide, the doors must be removed. Proceed to Step 3. DO NOT remove the handles. If all entrances are more than 38″ wide, skip to Installing the Refrigerator. 3 DISCONNECT THE WATER COUPLING (on some models) If the refrigerator has a water dispenser, there is a water line from the cabinet into the bottom hinge on the freezer door that must be disconnected. To disconnect, push in on the white collar of the coupling and pull out the tubing. White Collar 2 REMOVE THE BASE GRILLE Remove the grille by removing the two Phillipshead screws. Bottom Freezer Hinge 24