GE PSIC3RGXCV Owners Manual - Page 6

About TurboCool., About ClimateKeeper2., About Set Features., How it Works

Page 6 highlights

About Set Features. This pad is used to select the following features: TurboCool, Quick Ice, Door Alarm and Water Filter. Pressing SET FEATURES repeatedly will cycle through all of the available features and then About TurboCool.™ exit the mode. If no key is pressed, the mode will exit and return to displaying features currently set. How it Works TurboCool™ rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also OR be used if the refrigerator has been without power for an extended period. Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34°F (1°C), then it will cycle on and off to maintain this setting. After 8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting. About ClimateKeeper2.™ (on some models) How to Use Tactile LED Dispenser Control: How to Use Press TurboCool. The TurboCool temperature display will show Tc and the LED will be activated. After TurboCool is complete, the TurboCool indicator light will go out. NOTES: The refrigerator temperature cannot be changed during TurboCool. The freezer temperature is not affected during TurboCool. When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on. Touch-LED Dispenser Controls: Press SET FEATURES. The refrigerator temperature display will show TurboCool and/or TC. Press ON/OFF. After TurboCool is complete, the refrigerator compartment will return to the original setting. NOTES: The refrigerator temperature cannot be changed during TurboCool. The freezer temperature is not affected during TurboCool. When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on. How it Works The ClimateKeeper2™ is the industry's experience fog or small amounts of moisture most advanced refrigeration system, in the refrigerator compartment. This is delivering optimum temperature and normal and may come and go as different humidity performance to keep food garden food loads and environmental conditions fresh longer and reduce freezer burn. change. Wipe dry with a paper towel if The ClimateKeeper2 system features two desired. evaporators-one for the refrigerator and The separate airflow system minimizes one for the freezer. the mixing of air between the two compartments, which reduces fresh food This provides two separate cooling systems, odor transfer to improve the taste of ice. and separates the airflow between the fresh food and freezer compartments during The ClimateKeeper2 system also reduces normal cooling operations.* the number of defrosting cycles in the freezer This ensures that the humidity levels in evaporator, thereby reducing freezer burn. the fresh food compartment are significantly *Freezer air is used in the CustomCool higher than in a conventional system,** feature. allowing fresh produce and other unsealed foods to retain their moisture content and freshness longer. Moisture sensitive foods such as fresh fruit, salads, rice, etc., can now **Testing shows a higher level of humidity in the Fresh Food section in ClimateKeeper2 refrigerators versus conventional units. be stored on open shelves without excessive moisture loss. Due to the higher humidity in 6 the refrigerator, you may on occasion

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136

6
About TurboCool.
How it Works
TurboCool
rapidly cools the refrigerator
compartment in order to more quickly
cool foods. Use
TurboCool
when adding
a large amount of food to the refrigerator
compartment, putting away foods after they
have been sitting out at room temperature or
when putting away warm leftovers. It can also
be used if the refrigerator has been without
power for an extended period.
Once activated, the compressor will turn
on immediately and the fans will cycle on and
off at high speed as needed for eight hours.
The compressor will continue to run until the
refrigerator compartment cools
to approximately 34°F (1°C), then it will cycle
on and off to maintain this setting. After
8 hours, or if
TurboCool
is pressed again,
the refrigerator compartment will return
to the original setting.
How to Use
Tactile LED Dispenser Control:
How to Use
Press
TurboCool
. The TurboCool temperature
display will show
Tc
and the LED will be activated.
After
TurboCool
is complete, the
TurboCool
indicator light will go out.
NOTES:
The refrigerator temperature cannot be
changed during
TurboCool
.
The freezer temperature is not affected
during
TurboCool
.
When opening the refrigerator door during
TurboCool
, the fans will continue to run if
they have cycled on.
Touch-LED Dispenser Controls:
Press
SET FEATURES
. The refrigerator
temperature display will show
TurboCool
and/or
TC
. Press
ON/OFF
.
After
TurboCool
is complete, the refrigerator
compartment will return to the original setting.
NOTES:
The refrigerator temperature cannot be
changed during
TurboCool
.
The freezer temperature is not affected during
TurboCool
.
When opening the refrigerator door during
TurboCool
, the fans will continue to run if they
have cycled on.
About ClimateKeeper2.
(on some models)
How it Works
The
ClimateKeeper2
is the industry’s
most advanced refrigeration system,
delivering optimum temperature and
humidity performance to keep food garden
fresh longer and reduce freezer burn.
The
ClimateKeeper2
system features two
evaporators—one for the refrigerator and
one for the freezer.
This provides two separate cooling systems,
and separates the airflow between the fresh
food and freezer compartments during
normal cooling operations.*
This ensures that the humidity levels in
the fresh food compartment are significantly
higher than in a conventional system,**
allowing fresh produce and other unsealed
foods to retain their moisture content and
freshness longer. Moisture sensitive foods
such as fresh fruit, salads, rice, etc., can now
be stored on open shelves without excessive
moisture loss. Due to the higher humidity in
the refrigerator, you may on occasion
experience fog or small amounts of moisture
in the refrigerator compartment. This is
normal and may come and go as different
food loads and environmental conditions
change. Wipe dry with a paper towel if
desired.
The separate airflow system minimizes
the mixing of air between the two
compartments, which reduces fresh food
odor transfer to improve the taste of ice.
The
ClimateKeeper2
system also reduces
the number of defrosting cycles in the freezer
evaporator, thereby reducing freezer burn.
*Freezer air is used in the
CustomCool
feature.
**Testing shows a higher level of humidity in
the Fresh Food section in
ClimateKeeper2
refrigerators versus conventional units.
About Set Features.
This pad is used to select the following
features:
TurboCool
,
Quick Ice
,
Door Alarm
and
Water Filter
.
Pressing
SET FEATURES
repeatedly will cycle
through all of the available features and then
exit the mode. If no key is pressed, the mode
will exit and return to displaying features
currently set.
OR