GE PTS25LHSBB Use and Care Manual - Page 19
Remove The, Fresh Food Door, Transfer Top Hinge, To The Left, Remove The Freezer Door
UPC - 084691126256
View all GE PTS25LHSBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation Instructions 1 REMOVE THE FREEZER DOOR Tape the door shut with masking tape. Remove the hinge cover on top of the freezer door (on some models). Remove the two screws, then lift the hinge straight up to free the hinge pin from the socket in the top of the door. Top Hinge Remove the tape and tilt the door away from the cabinet. Lift it off the center hinge pin. Set the door on a non-scratching surface with the inside up. 2 REMOVE THE FRESH FOOD DOOR Tape the door shut with masking tape. Remove the center hinge pin with a 3/4″ socket. Hinge Pin 3 TRANSFER TOP HINGE TO THE LEFT Interchange hinge and screws at top right with screws at the top left of cabinet. See top hinge illustration in Step 1. Do not tighten screws on hinge side at this time. 4 TRANSFER BOTTOM HINGE BRACKET TO THE LEFT Remove the base grille by grasping it at the bottom and pulling it straight out. Remove the insert at the top left side of the base grille and install it on the right side. You must pull up on the insert to remove and snap down to replace. Using a socket driver, move the bottom hinge bracket from the right side to the left side. Remove the tape and tilt the door away from the cabinet. Lift the door straight off the bottom hinge bracket. Set the door on a non-scratching surface, with the inside up. CAUTION: Do not let door drop to the floor. To do so could damage the door stop. 19