GE PVM9005EJES Use and Care Manual - Page 30
Replacing the light bulb., About the exhaust feature.
View all GE PVM9005EJES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Replacing the light bulb. Remove screws. Replacing the Oven Cavity Lamp 1. Disconnect power at the main fuse or circuit breaker panel. 2. Remove the top grill by removing the two screws that hold it in place. 3. Remove charcoal filter if present. NOTE: Charcoal filter is an optional kit, you may not have one. 4. Press the retainer holding the lamp shield in place. Cooktop Lights/Nite Lights Replace with 120 volt, 40 watt (max) incandescent bulbs. Order WB25X10030 from your GE supplier. 1 To replace the cooktop lights/nite lights, first disconnect the power at the main fuse or circuit breaker panel, or pull the plug. 2 One side at a time, remove the screw from the side of the light compartment cover and lower the cover until it stops. 3 Be sure the bulb is cool before removing. Break the adhesive seal by gently unscrewing the bulb. 4 Screw in the new bulb, then raise the light cover and replace the screw. Repeat for the other light. Connect electrical power to the oven. 5. Pull the lamp shield out. Unscrew the light bulb out and replace with the 120V-130V, 30W incondescent bulb. Order WB25X10029 from your GE supplier. 6. Return the lamp and lamp shield to original position and replace charcoal filter. 7. Replace the grill and 2 screws. Reconnect power to the oven. About the exhaust feature. Charcoal filter (on some models). Vent Fan The vent fan has two metal reusable vent filters. Models that recirculate air back into the room also use a charcoal filter. Reusable vent filters (on all models). 30 Reusable Vent Filters The metal filters trap grease released by foods on the cooktop. They also prevent flames from foods on the cooktop from damaging the inside of the oven. For this reason, the filters must always be in place when the hood is used. The vent filters should be cleaned once a month, or as needed.