Gigabyte A620M GAMING X AX User Manual - Page 24
SPI_TPM Trusted Platform Module Header, BAT Battery
View all Gigabyte A620M GAMING X AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
F_USB3 F _0 14) SPI_TPM (Trusted Platform Module Header) You may connect an SPI TPM (Trusted Platform Module) to this header. _ _B _ S_ _ S F_ Pin No. Definition _F 1 Data Output 11 1 2 Power (3.3V) 12 2 3 No Pin 4 NC 5 Data Input 6 CLK _0 F 7 Chip Select 8 GND 9 IRQ 10 NC 11 NC 12 RST B S S_F B_ 15) BAT (Battery) The battery_ provides poweFr to keep the values (such as BIOS configurations, date, and _ti3me infoUrmation) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. F_USB3 F_USB30 3 You may clear the CMOS values by removing the battery: 1. Turn off your computer and unplug the power cord. 2. Gently remove the battery from the battery holder and wait for one minute. (Or use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder, making them short for 5 seconds.) 3. Replace the battery. 4. Plug in the power cord and restart your computer. •• Always turn off your computer and unplug the power cord before replacing the battery. •• Replace the battery with an equivalent one. Damage to your devices may occur if the battery is replaced with an incorrect model. •• Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model. •• When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the battery (the positive side should face up). •• Used batteries must be handled in accordance with local environmental regulations. - 24 -