Gigabyte B360 HD3P User Manual - Page 15
D_LED1/D_LED2 Digital LED Strip Headers, DLED_V_SW1/DLED_V_SW2 Digital LED Strip Power Select Jumpers
View all Gigabyte B360 HD3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5) D_LED1/D_LED2 (Digital LED Strip Headers) The headers can be used to connect a standard 5050 digital LED strip, with maximum power rating of 2A (12V or 5V) and maximum length of 5m or maximum number of 300 LEDs. 1 D_LED1 1 1 D_LED2 Pin No. 1 2 3 Definition V D G Digital LED Strip Connect your digital LED strip to the header. There are 12V and 5V digital LED strips. Be sure to verify the voltage requirements of your digital LED strip and set the DLED_V_SW1 and DLED_V_SW2 jumpers accordingly. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 of the digital LED strip header. Incorrect connection may lead to the damage of the LED strip. For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 2, "BIOS Setup," "Peripherals." Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. 6) DLED_V_SW1/DLED_V_SW2 (Digital LED Strip Power Select Jumpers) The jumpers allow you to select the supply voltage of the D_LED1 and D_LED2 headers. Be sure to verify the voltage requirements of your digital LED strip and set the correct voltage with this jumper before connection. Incorrect connection may lead to the damage of the LED strip. 1 1 DLED_V_SW1 1-2: 5V (Default) 1 1 2-3: 12V DLED_V_SW2 - 15 -