Gigabyte B550M S2H User Manual - Page 15
M2A_CPU M.2 Socket 3 Connector, SATA3 0/1/2/3 SATA 6Gb/s Connectors
View all Gigabyte B550M S2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
7) SATA3 0/1/2/3 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support RAID 0, RAID 1, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. SATA3 1 73 Pin No. Definition 1 GND 2 TXP 1 72 1 0 1 7 3 TXN 4 GND 5 RXN 1 7 6 RXP 7 GND F_USB30 3 F_USB3 _3 U B S F_ 8) M2A_CPU (M.2 Socket 3 Connector) The M.2 connectors support M.2 SATA SSDs or M.2 PCIe SSDs and support RAID configuration. Please note that an M.2 PCIe SSD cannot be used to create a RAID set with a SATA hard drive. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. S S_F 42 60 80 Follow the steps below to correctly install an M.2 SSD in the M.2 connector. Step 1: Use a screw driver to unfasten the screw and standoff from the motherboard. Locate the proper mounting hole for the M.2 SSD to be installed and then screw the standoff first. Step 2: Slide the M.2 SSD into the connector at an angle. Step 3: Press the M.2 SSD down and then secure it with the screw. Select the proper hole for the M.2 SSD to be installed and refasten the screw and standoff. _ S_ - 15 - _ _B F _0 _F _0 F _U _ B F_USB3 F __ 3