Gigabyte B650 AORUS ELITE AX ICE User Manual - Page 22
LED_C RGB LED Strip Header, SATA3 0/1/2/3 SATA 6Gb/s Connectors
View all Gigabyte B650 AORUS ELITE AX ICE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
8) LED_C (RGB LED Strip Header) The header can be used to connect a stDPaOEnBRdUTaGrd 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m. Pin No. Definition 1 12V 1 2G 3R 4B RGB LED Strip Connect your RGB LED strip to the header. The power pin (marked with a triangle 1 on the plug) of the LED strip must be connected to Pin 1 (12V) of this header. 12V Incorrect connection may lead to the damage of the LED strip. For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page of GIGABYTE's website. Before installing or removing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. 9) SATA3 0/1/2/3 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support RAID 0, RAID 1, and RAID 10. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website for instructions on configuring a RAID array. G.QBOFM G.QBOFM Pin No. Definition 1 GND 7 1 2 TXP 7 1 3 TXN SATA3 2 0 31 4 GND 5 RXN 6 RXP 7 GND To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's website and search for "SATA Configuration" for more information. - 22 -