Gigabyte B660M DS3H DDR4 BIOS Setup Guide - Page 21

&& Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. ƒƒ NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. ƒƒ SATA Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the chipset SATA controllers. && Port Enables or disables each SATA port. && SATA Port DevSlp Allows you to determine whether to let the connected SATA device go into sleep mode. && Hot plug Enables or disable the hot plug capability for each SATA port. && Configured as eSATA Enables or disables support for external SATA devices. ƒƒ VMD setup menu Allows you to configure the VMD controllers. To create RAID configurations, set Enable VMD controller to Enabled and set Enable VMD Global Mapping to Disabled. Then depending on the SATA/M.2 connector you use, set the corresponding Map this Root Port under VMD item to Enabled. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website for instructions on configuring a RAID array. - 21 -