Gigabyte GA-770T-D3L Manual - Page 35
MB Intelligent Tweaker(M.I.T.), System Voltage Optimized, System Voltage Control - overclock
View all Gigabyte GA-770T-D3L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2010 Award Software MB Intelligent Tweaker(M.I.T.) } Advanced Clock Calibration CPU Clock Ratio CPU NorthBridge Freq. (Note) CPU Host Clock Control x CPU Frequency(MHz) PCIE Clock(MHz) HT Link Frequency Set Memory Clock x Memory Clock } DRAM Configuration ******** System Voltage Optimized ******** System Voltage Control x DRAM Voltage Control x NB Voltage Control x CPU NB VID Control (Note) x CPU Voltage Control Normal CPU Vcore [Press Enter] [Auto] 3000 Mhz [Auto] 2000 Mhz [Auto] 200 [Auto] [Auto] [Auto] x4.00 800Mhz [Press Enter] [Auto] Auto Auto Auto Auto 1.2500V Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults • Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) • When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. Advanced Clock Calibration CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Advanced Clock Calibration EC Firmware Selection Advanced Clock Calibration x Value (All Cores) x Value (Core 0) x Value (Core 1) x Value (Core 2) x Value (Core 3) CPU core Control x CPU core 0 x CPU core 1 (Note) x CPU core 2 (Note) x CPU core 3 (Note) [Normal] [Disabled] -2% -2% -2% -2% -2% [Auto] Enabled Enabled Enabled Enabled Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults (Note) This item appears only if you install a CPU that supports this feature. - 35 - BIOS Setup