Gigabyte GA-78LMT-S2P Manual - Page 8

1-2 Product Specifications CPU ŠŠ AM3+ Socket: - AMD AM3+ processor - AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus ŠŠ 5200 MT/s Chipset ŠŠ North Bridge: AMD 760G ŠŠ South Bridge: AMD SB710 Memory ŠŠ 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. ŠŠ Dual channel memory architecture ŠŠ Support for DDR3 1333+ (O.C.)/1066/800 MHz memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Onboard ŠŠ North Bridge: Graphics - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. Audio ŠŠ Realtek ALC889 codec ŠŠ High Definition Audio ŠŠ 2/4/5.1/7.1-channel * To enable 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN ŠŠ 1 x Realtek RTL8111E chip (10/100/1000 Mbit) Expansion Slots ŠŠ Š Š ŠŠ Storage Interface ŠŠ USB Š Š ŠŠ 1 x PCI Express x16 slot, running at x16 1 x PCI Express x1 slot (All PCI Express slots conform to the PCI Express 2.0 standard.) 1 x PCI slot South Bridge: - 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices - Support for SATA RAID 0, RAID 1, RAID 10, and JBOD South Bridge: - Up to 6 USB 2.0/1.1 ports (2 on the back panel, 4 via the USB brackets connected to the internal USB headers) j - Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers) k Etron EJ168 chip: j - Up to 2 USB 3.0/2.0 ports on the back panel j Only for GA-78LMT-USB3. k Only for GA-78LMT-S2P. Hardware Installation - 8 -