Gigabyte GA-870-UD3P Manual - Page 24
SATA3_0/1/2/3/4/5 SATA 6Gb/s Connectors, Controlled by AMD SB850 South Bridge, supports RAID 0, RAID 1
View all Gigabyte GA-870-UD3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DEBUG PORT DEBUG PORT DEBUG PORT DEBUG PORT DEBUG DEBUG 7) SATA3_0/1/2/3/4/5 (SATA 6Gb/s Connectors, ControlledPObRyTAMD SBP8O5R0T South Bridge) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standards. Each SATA connector supports a single SATA device. The AMD SB850 controller supports RAID 0, RAID 1, RAID 5, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. SATA3_5 1 7 1 7 SATA3_4 SATA3_0 1 SATA3_3 7 1 SATA3_1 7 SATA3_2 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND Please connect the L-shaped end of the SATA cable to your SATA hard drive. • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are to be used, the total number of hard drives must be an even number. • A RAID 5 configuration requires at least three hard drives. (The total number of hard drives does not have to be an even number.) • A RAID 10 configuration requires four hard drives. Hardware Installation - 24 -