Gigabyte GA-945GCM-S2C Manual - Page 48
CPU Clock Ratio, O.C FSB1333 Core 2 CPU, CPU Host Clock Control - overclocking
View all Gigabyte GA-945GCM-S2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2-9 Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Frequency/Voltage Control CPU Clock Ratio (Note) O.C FSB1333 Core. 2 CPU CPU Host Clock Control x CPU Host Frequency(Mhz) PCI Express Frequency (Mhz) System Memory Multiplier Memory Frequency (Mhz) DIMM OverVoltage Control FSB OverVoltage Control CPU Voltage Control Normal CPU Vcore [18X] [Auto] [Disabled] 200 [Auto] [Auto] 533 [Normal] [Normal] [Normal] 1.38750V Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) CPU Clock Ratio (Note) Allows you to alter the clock ratio for the installed CPU. The item is present only if a CPU with unlocked clock ratio is installed. O.C FSB1333 Core 2 CPU Enable use of a CoreTM 2 CPU with 1333 MHz FSB through overclocking. You must install the FSB 1333 MHz CoreTM 2 CPU with DDR2 533 (or above) memory module(s). Auto Set this item to Auto. Then save the changes and restart your computer. During the POST, a message will appear asking if you want to enable the use of a FSB 1333 CoreTM 2 processor. Press to confirm or to reject. Or press any key to continue the POST. (Default value) Disabled Disable this function. Enabled Enable this function. CPU Host Clock Control Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled) (Note) This item appears only if you install a CPU that supports this feature. GA-945GCM-S2L/S2C Motherboard - 48 -