Gigabyte GA-965G-DS4 Manual - Page 61

English b. Select the floppy drive or hard drive where the BIOS file is saved, such as "Floppy A" and press ENTER. Dual BIOS Utility V2.03 Boot From Main Bios Main ROM Type/Size MXIC SPI Serial Fla 1M Backup ROM Type/Size MXIC SPI Serial Fla 1M Wide Range Protection Disable Boo0t Ffriolem(s) fMoauindBios Floppy A HDD 0-0 Auto Recovery Enable Halt On Error Disable Keep DMI Data Enable Copy Main ROM Data to Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Update Main BIOS from Drive Total size : 0 Update Backup BIFOrSeefrosimzeD:ri0ve F5 : Refresh SaDveELMa:inDBelIOetSe to Drive Save Backup BIOS to Drive PgDn/PgUp: Modify : Move ESC: Reset F10: Power Off c. Select the BIOS file and press ENTER. Make sure again the BIOS file matches your motherboard model. Step 2: The process of system reading the BIOS file from the floppy disk is displayed on the screen. When the message "Are you sure to update BIOS?" appears, press ENTER. The BIOS update will begin and the current process will be displayed. 1. Do not turn off or restart the system when the system is reading/updating the BIOS. 2. Do not remove the floppy disk or hard drive/USB drive when the system is updating the BIOS. Step 3: When the update process is complete, press any key to return to the Dual BIOS / Q-Flash main menu. Dual BIOS Utility V2.03 Boot From Main Bios Main ROM Type/Size MXIC SPI Serial Fla Backup ROM Type/Size MXIC SPI Serial Fla Wide Range Protection Disable Boot From Main Bios Auto Recovery Enable Halt On Error Disable K!e! eCpoDpMy IBDIaOtaS coEmnpableleted - Pass !! Copy Main ROM Data to Backup Please pLroeasds Danefyauklet ySetotticnogns tinue Save Settings to CMOS Q-Flash Utility Update Main BIOS from Drive Update Backup BIOS from Drive Save Main BIOS to Drive Save Backup BIOS to Drive PgDn/PgUp: Modify : Move ESC: Reset 1M 1M F10: Power Off - 61 - Appendix