Gigabyte GA-9IVDTH User Manual - Page 49
Floppy, disk controller, Check, Parallel ATA, Serial ATA, Native Mode Operation, SATA RAID Enable
View all Gigabyte GA-9IVDTH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Floppy disk controller Enabled Enable the floppy disk controller. Disabled Disable the device. (Default value) BIOS Setup Floppy Check Enabled Disabled Enable the device to verify floppy typer when system boot. (Default value) Disable the this function. Parallel ATA Disabled Both Channel 0 Channel1 Disable the device. Select both Channel 0 and Channel 1 as Parallel ATA. (Default value) Select both Channel 0 as Parallel ATA. Select both Channel 1 as Parallel ATA. Serial ATA Enabled Disabled Enable Serial ATA device. (Default value) Disable the Serial ATA. Native Mode Operation This option allows user to set the native mode for ATA function. Note that certain OS is not supported under Native Mode. Auto Auto detected. (Default value) Serial ATA Set Native mode to Serial ATA. Parallel ATA Set Native mode to Parallel ATA. SATA RAID Enable Enabled Disabled Enable the SATA RAID function. Disable the device. (Default value) 49