Gigabyte GA-B150M-D3H DDR3 User Manual - Page 16
M.2 M.2 Socket 3 Connector, The M.2 connectors support M.2 SATA SSDs and M.2 PCIe SSDs.
View all Gigabyte GA-B150M-D3H DDR3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
B S_ B 7) M.2 (M.2 Socket 3 Connector) The M.2 connectors support M.2 SATA SSDs and M.2 PCIeS SSDs. S 80 60 42 Follow the steps below to correctly install an M.2 SSD in the M.2 connector. Step 1: Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole for the M.2 SSD to be installed and then screw the nut first. Step 2: Slide the M.2 SSD intoF the connector at an angle. Step 3: Press the M.2 SSD down and then secure it with the screw. On the motherboard there are three length adjustment holes for the M.2 SSD. Select the proper hole for the M.2 SSD to be installed and refasten the screw and nut. _0 When installing different types of M.2 SSDs (including SATA SSDs, PCIe x4 SSDs, and PCIe x2 SSDs), be sure to refer to the supported configurations in the tables below according to the operating mode of your SATA controller. Connector Type of SSD SATA3_0 _ F SATA3_1 SATA3_2 SATA3_3 SATA3_4 SATA3_5 SATA Express PCI SATA SSD a a a a a r a NA a a a a a r NA NA a a a a a r a a a a a a a r NA a PCIe x4 SSD a a a a a a r NA PCIe x2 SSD a _0 Fa a a a a r a No SSDs a a a a a a a a Installed a a a a a a NA a a a a a a a a NA a: Supported,r: Not supported,NA: No devices installed - 16 -