Gigabyte GA-B85M-D3V Plus User Manual - Page 30

Realtek PCIe GBE Family Controller, IntelR Smart Connect Technology

Get Gigabyte GA-B85M-D3V Plus PDF manuals and user guides View all Gigabyte GA-B85M-D3V Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

&& SATA Mode Selection Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode. IDE Configures the SATA controller to IDE mode. AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) `` Serial ATA Port 0/1/2/3/4/5 && Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && External SATA Enables or disables support for external SATA devices. (Default: Disabled) `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port and parallel port. && Serial Port A Enables or disables the onboard serial port. (Default: Enabled) && Parallel Port Enables or disables the onboard parallel port. (Default: Enabled) && Device Mode This item is configurable only when Parallel Port is set to Enabled. Selects an operating mode for the onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode. `` Intel(R) Smart Connect Technology && ISCT Support Enables or disables Intel® Smart Connect Technology. (Default: Disabled) `` Realtek PCIe GBE Family Controller This sub-menu provides information on LAN configuration. - 30 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
&
SATA Mode Selection
Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode.
±
IDE
Configures the SATA controller to IDE mode.
±
AHCI
Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
`
Serial ATA Port 0/1/2/3/4/5
&
Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
&
Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
&
External SATA
Enables or disables support for external SATA devices. (Default: Disabled)
`
Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port and
parallel port.
&
Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
&
Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
&
Device Mode
This item is configurable only when
Parallel Port
is set to
Enabled
. Selects an operating mode for the
onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced
Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.
`
Intel(R) Smart Connect Technology
&
ISCT Support
Enables or disables Intel
®
Smart Connect Technology. (Default: Disabled)
`
Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN configuration.
- 30 -