Gigabyte GA-E240N Manual - Page 26
Date mm:dd:yy, Time hh:mm:ss, IDE Channel 0, 1 Master/Slave, Halt On, Memory
View all Gigabyte GA-E240N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2012 Award Software Standard CMOS Features Date (mm:dd:yy) Tue, Jul 10 2012 Time (hh:mm:ss) 22:31:24 Item Help Menu Level `` IDE Channel 0 Master `` IDE Channel 0 Slave `` IDE Channel 1 Master `` IDE Channel 1 Slave [None] [None] [None] [None] Halt On [All, But Keyboard] Base Memory Extended Memory 640K 1662M Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults && Date (mm:dd:yy) Sets the system date. && Time (hh:mm:ss) Sets the system time. && IDE Channel 0, 1 Master/Slave IDE HDD Auto-Detection Press to autodetect the parameters of the SATA device on this channel. IDE Channel 0, 1 Master/Slave Configure your STA devices by using one of the two methods below: •• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default) •• None If no SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large. The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. Capacity Approximate capacity of the currently installed hard drive. && Halt On Allows you to determine whether the system will stop for an error during the POST. Options are: "All Errors," "No Errors," "All, But Keyboard". (Default) && Memory These fields are read-only and are determined by the BIOS POST. - 26 -