Gigabyte GA-F2A75-D3H User Manual

Gigabyte GA-F2A75-D3H Manual

Get Gigabyte GA-F2A75-D3H PDF manuals and user guides View all Gigabyte GA-F2A75-D3H manuals
Add to My Manuals
Save this manual to your list of manuals

Gigabyte GA-F2A75-D3H manual content summary:

  • Gigabyte GA-F2A75-D3H | User Manual - Page 1
    GA-F2A75-D3H User's Manual Rev. 1002 12ME-F275D3H-1002R
  • Gigabyte GA-F2A75-D3H | User Manual - Page 2
    Motherboard GA-F2A75-D3H Aug. 20, 2012 Motherboard GA-F2A75-D3H Aug. 20, 2012
  • Gigabyte GA-F2A75-D3H | User Manual - Page 3
    types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. „„ For detailed product information, carefully read the User's Manual. For product-related information, check on our website at: http://www.gigabyte.com Identifying Your
  • Gigabyte GA-F2A75-D3H | User Manual - Page 4
    Table of Contents Box Contents...6 Optional Items...6 GA-F2A75-D3H Motherboard Layout 7 GA-F2A75-D3H Motherboard Block Diagram 8 Chapter 1 Hardware Installation 9 1-1 Installation Precautions 9 1-2 Product Specifications 10 1-3 Installing the APU and APU Cooler 13 1-3-1 Installing the APU...13
  • Gigabyte GA-F2A75-D3H | User Manual - Page 5
    55 3-1 Installing Chipset Drivers 55 3-2 Application Software 56 3-3 Technical Manuals 56 3-4 Contact...57 3-5 System...57 3-6 Download Center 58 3-7 the Sound Recorder 84 5-3 Troubleshooting 85 5-3-1 Frequently Asked Questions 85 5-3-2 Troubleshooting Procedure 86 5-3-3 Regulatory Statements
  • Gigabyte GA-F2A75-D3H | User Manual - Page 6
    Box Contents 55 GA-F2A75-D3H motherboard 55 Motherboard driver disk 55 User's Manual 55 Quick Installation Guide 55 Four SATA cables 55 I/O Shield The box contents above are for reference only and the actual items shall depend on the product package you
  • Gigabyte GA-F2A75-D3H | User Manual - Page 7
    SYS_FAN3 KB_MS_USB SYS_FAN1 DVI_VGA ATX_12V Socket FM2 ATX HDMI R_USB30 USB_LAN AUDIO Realtek GbE LAN CODEC CPU_FAN SYS_FAN2 PCIEX1_1 PCIEX16 GA-F2A75-D3H PCIEX1_2 PCIEX1_3 PCIEX4 M_BIOS B_BIOS DDR3_4 DDR3_2 DDR3_3 DDR3_1 F_USB30 AMD A75 BAT iTE Super I/O PCI1 PCI2 F_AUDIO CLR_CMOS
  • Gigabyte GA-F2A75-D3H | User Manual - Page 8
    GA-F2A75-D3H Motherboard Block Diagram 1 PCI Express x16 APU CLK+/- (100 MHz) PCIe CLK (100 MHz) 3 PCI Express x1 LAN RJ45 Realtek GbE LAN x16 x1 x1
  • Gigabyte GA-F2A75-D3H | User Manual - Page 9
    electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: •• Prior to installation, make sure the are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
  • Gigabyte GA-F2A75-D3H | User Manual - Page 10
    list on the official website when the memory modules are available on the market. Š Dual channel memory architecture Š Support for DDR3 1866/1600/1333/1066 MHz memory modules Š Support for AMD Memory Profile (AMP)/Extreme Memory Profile (XMP) memory modules (Go to GIGABYTE's website for the latest
  • Gigabyte GA-F2A75-D3H | User Manual - Page 11
    fan speed detection Š APU overheating warning Š APU/System fan fail warning Š APU/System fan speed control * Whether the APU/system fan speed control function is supported will depend on the APU/system cooler you install. Š 2 x 64 Mbit flash Š Use of licensed AMI EFI BIOS
  • Gigabyte GA-F2A75-D3H | User Manual - Page 12
    EasyTune * Available functions in EasyTune may differ by motherboard model. Support for Smart Recovery 2 Support for Auto Green Support for ON/OFF Charge Support for 3TB+ Unlock Support for Q-Share Norton Internet Security (OEM version) Support for Microsoft® Windows 8/7/Vista/XP ATX Form Factor; 30
  • Gigabyte GA-F2A75-D3H | User Manual - Page 13
    and APU Cooler Read the following guidelines before you begin to install the APU: •• Make sure that the motherboard supports the APU. (Go to GIGABYTE's website for the latest APU support list.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the APU
  • Gigabyte GA-F2A75-D3H | User Manual - Page 14
    B. Follow the steps below to correctly install the APU into the motherboard APU socket. •• Before installing the APU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the APU. •• Do not force the APU into the APU socket. The APU cannot fit in if
  • Gigabyte GA-F2A75-D3H | User Manual - Page 15
    cam handle from the left side to the right side (as the picture above shows) to lock into place. (Refer to your APU cooler installation manual for instructions on installing the cooler.) Step 4: Finally, attach the power connector of the APU cooler to the APU fan header (CPU_FAN) on the motherboard
  • Gigabyte GA-F2A75-D3H | User Manual - Page 16
    the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to
  • Gigabyte GA-F2A75-D3H | User Manual - Page 17
    1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard
  • Gigabyte GA-F2A75-D3H | User Manual - Page 18
    Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: •• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. •• Always turn off the computer and unplug the power cord from the power
  • Gigabyte GA-F2A75-D3H | User Manual - Page 19
    instructions on configuring a Dual Graphics system. A. System Requirements -- AMD A series processor -- Windows 7 operating system -- An AMD Dual Graphics technology-supported and driver version. Refer to the manual that came with your graphics card for more information. - 19 - Hardware
  • Gigabyte GA-F2A75-D3H | User Manual - Page 20
    up to 192KHz/24bit 8-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is 1920x1200, but the actual resolutions supported are dependent on the monitor being used. After installing the HDMI device, make sure to set the default
  • Gigabyte GA-F2A75-D3H | User Manual - Page 21
    being used.) •• HDCP compliant monitor(s) USB 3.0/2.0 Port The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. Use connected to the default Mic in jack. Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio configuration in Chapter 5,
  • Gigabyte GA-F2A75-D3H | User Manual - Page 22
    1-8 Internal Connectors 1 4 4 2 3 4 12 7 6 9 10 13 14 11 5 8 1) ATX_12V 2) ATX 3) CPU_FAN 4) SYS_FAN1/SYS_FAN2/SYS_FAN3 5) CLR_CMOS 6) SATA3 0/1/2/3/4/5 7) BAT 8) F_PANEL 9) F_AUDIO 10) SPDIF_O 11) F_USB1/F_USB2 12) F_USB30 13) COM 14) TPM Read the following guidelines before connecting
  • Gigabyte GA-F2A75-D3H | User Manual - Page 23
    1/2) ATX_12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all
  • Gigabyte GA-F2A75-D3H | User Manual - Page 24
    in the correct orientation (the black connector wire is the ground wire). The motherboard supports APU fan speed control, which requires the use of a APU fan with fan to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for
  • Gigabyte GA-F2A75-D3H | User Manual - Page 25
    with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The AMD A75 Chipset supports RAID 0, RAID 1, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. SATA3 1 1 135 024 Pin No. Definition
  • Gigabyte GA-F2A75-D3H | User Manual - Page 26
    speaker on the chassis front panel. The system reports system startup status by issuing a beep code. One single short beep will be heard if no problem is detected at system startup. •• HD (Hard Drive Activity LED, Blue): Connects to the hard drive activity LED on the chassis front panel. The LED
  • Gigabyte GA-F2A75-D3H | User Manual - Page 27
    header supports 97 front panel audio module, refer to the instructions on how to activate AC'97 functionality via the back panel audio (only supported when using an HD This header supports digital S/PDIF digital audio cable, carefully read the manual for your expansion card. 1 Voltage measurement
  • Gigabyte GA-F2A75-D3H | User Manual - Page 28
    11) F_USB1/F_USB2 (USB 2.0/1.1 Headers) G The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer. Pin No. Definition 1 Power (5V) 9 10 1 2 2 Power (5V)
  • Gigabyte GA-F2A75-D3H | User Manual - Page 29
    13) COM (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. 9 10 F_USB30 Pin No. Definition 1 NDCD- 1 2 NSIN 2 3 NSOUT 4 NDTR- 5 GND 6 NDSR- 7 NRTS- 8 NCTS- F_AUDIO
  • Gigabyte GA-F2A75-D3H | User Manual - Page 30
    Hardware Installation - 30 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 31
    latest version of BIOS from the Internet and updates the BIOS. For instructions on using the Q-Flash and @BIOS utilities, refer to Chapter 4, ." •• Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash
  • Gigabyte GA-F2A75-D3H | User Manual - Page 32
    2-1 Startup Screen The following startup Logo screen will appear when the computer boots. Function Keys Function Keys: : BIOS SETUP\Q-FLASH Press the key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup. : SYSTEM INFORMATION Press the key to display your
  • Gigabyte GA-F2A75-D3H | User Manual - Page 33
    2-2 The Main Menu A. The 3D BIOS Screen (Default) On GIGABYTE's uniquely designed 3D BIOS screen, you can use your mouse to move through the motherboard image and click to enter the function menu in each area for quick configuration. For example, pass your mouse arrow over the CPU and memory sockets
  • Gigabyte GA-F2A75-D3H | User Manual - Page 34
    BIOS Setup Program Function Keys Move the selection bar to select a setup menu Move the selection bar to select an configuration item on a menu Execute command or enter a menu / Increase the numeric value or make changes / Decrease the numeric
  • Gigabyte GA-F2A75-D3H | User Manual - Page 35
    2-3 M.I.T. Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
  • Gigabyte GA-F2A75-D3H | User Manual - Page 36
    MHz to 2000 MHz. && NB Clock Control Enables or disables the control of CPU North Bridge frequency. (Default: Auto) && NB Clock (Mhz) Allows you to manually set the CPU North Bridge frequency. The adjustable range is from 800 MHz to 6000 MHz. This item is configurable only when NB Clock Control
  • Gigabyte GA-F2A75-D3H | User Manual - Page 37
    be reduced during system halt state to decrease power consumption. The C6 state is a more enhanced power-saving state than C1. (Default: Enabled) && C1E SUPPORT Allows you to determine whether to let the CPU enter C1 mode in system halt state. When enabled, the CPU core frequency and voltage will
  • Gigabyte GA-F2A75-D3H | User Manual - Page 38
    adjusted according to the BCLK/PCIe Clock Control and System Memory Multiplier settings. (Note) This item is present only when you install a memory module that supports this feature. BIOS Setup - 38 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 39
    different channels of the memory to increase memory performance and stability. (Default: Enabled) (Note) This item is present only when you install a memory module that supports this feature. - 39 - BIOS Setup
  • Gigabyte GA-F2A75-D3H | User Manual - Page 40
    `` Channel A/B Timing Settings This sub-menu provides memory timing settings for each channel of memory. The respective timing setting screens are configurable only when DRAM Timing Selectable is set to Quick or Expert. Note: Your system may become unstable or fail to boot after you make changes on
  • Gigabyte GA-F2A75-D3H | User Manual - Page 41
    `` PC Health Status && Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. && Case Open Displays the detection status of
  • Gigabyte GA-F2A75-D3H | User Manual - Page 42
    full speeds. && Slope PWM Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is set to Manual. Options are: 0.75 PWM value /oC ~ 2.50 PWM value /oC. && 1st/2nd/3rd System Fan Speed Control (SYS_FAN1~ SYS_FAN3 Connectors) Allows you to determine whether
  • Gigabyte GA-F2A75-D3H | User Manual - Page 43
    section provides information on your CPU, memory, motherboard model, and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && System Language Selects the default language used by the BIOS. && System Date Sets the system date. The date format is
  • Gigabyte GA-F2A75-D3H | User Manual - Page 44
    submenu will be presented here. Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device list UEFI:" string. Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select the optical drive that
  • Gigabyte GA-F2A75-D3H | User Manual - Page 45
    UEFI Option ROM only. Legacy First Enables legacy option ROM first. UEFI First Enables UEFI option ROM first. This item is configurable only when CSM Support is set to Always. && Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage
  • Gigabyte GA-F2A75-D3H | User Manual - Page 46
    or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disable Link) && Ipv4 PXE Boot Support Enables or disables IPv4 PXE Support. This item is configurable only when Network stack is enabled. && Ipv6 PXE Boot
  • Gigabyte GA-F2A75-D3H | User Manual - Page 47
    a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. && IOMMU Enables or disables AMD IOMMU support. (Default: Enabled) && Onboard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in
  • Gigabyte GA-F2A75-D3H | User Manual - Page 48
    Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. `` Trusted Computing && TPM SUPPORT Enables or disables Trusted Platform Module (TPM). Set this item to Enable when a TPM device is installed. (Default: Disable) BIOS Setup - 48
  • Gigabyte GA-F2A75-D3H | User Manual - Page 49
    `` SATA Configuration && PORT0 Hot Plug~PORT5 Hot Plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && SATA Power on PORT0~SATA Power on PORT5 Enables or disables each SATA port. (Default: Enabled) - 49 - BIOS Setup
  • Gigabyte GA-F2A75-D3H | User Manual - Page 50
    `` GFX Configuration && Primary Video Device Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGD Video Sets the onboard graphics as the first display. NB PCIe Slot Video Sets the PCI Express graphics card on the
  • Gigabyte GA-F2A75-D3H | User Manual - Page 51
    is turned on upon the return of the AC power. Always Off The system stays off upon the return of the AC power. (Default) (Note) Supported on Windows 7/Vista operating system only. - 51 - BIOS Setup
  • Gigabyte GA-F2A75-D3H | User Manual - Page 52
    && Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Disabled Disables this function. (Default) Password Set a password with 1~5 characters to turn on
  • Gigabyte GA-F2A75-D3H | User Manual - Page 53
    2-8 Save & Exit && Save & Exit Setup Press on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press to return to the BIOS Setup Main Menu. && Exit Without Saving Press on this item and select Yes. This exits the BIOS
  • Gigabyte GA-F2A75-D3H | User Manual - Page 54
    BIOS Setup - 54 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 55
    install the utilities. Or click No if you want to manually select the utilities to install on the Application Software page later. •• For USB 2.0 driver support under the Windows XP operating system, please install the Windows XP Service Pack 1 or later. After installing the SP1 (or later), if
  • Gigabyte GA-F2A75-D3H | User Manual - Page 56
    and applications that GIGABYTE develops and some free software. You can click the Install button on the right of an item to install it. 3-3 Technical Manuals This page provides the content descriptions for this driver disk. Drivers Installation - 56 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 57
    3-4 Contact For the detailed contact information of the GIGABYTE Taiwan headquarter or worldwide branch offices, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information. - 57 - Drivers Installation
  • Gigabyte GA-F2A75-D3H | User Manual - Page 58
    3-6 Download Center To update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE website. The latest version of the BIOS, drivers, or applications will be displayed. 3-7 New Utilities This page provides a quick link to GIGABYTE's lately developed utilities
  • Gigabyte GA-F2A75-D3H | User Manual - Page 59
    by adding one more physical BIOS chip. What is DualBIOS™? Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and a backup BIOS. . For the sake of system safety, users cannot update the backup BIOS manually. What is Q-Flash™? With Q-Flash you can update the system BIOS without
  • Gigabyte GA-F2A75-D3H | User Manual - Page 60
    BIOS to Drive option allows you to save the current BIOS file. •• Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system. •• If the Flash. 2. Select USB Flash Drive. Q-Flash Utility v1.05 Model Name : F2A75-D3H BIOS Version : D7 BIOS Date : 08/10/2012 Flash Type/Size :
  • Gigabyte GA-F2A75-D3H | User Manual - Page 61
    Step 4: During the POST, press to enter BIOS Setup. Select Load Optimized Defaults on the Save & Exit screen and press to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend that you reload BIOS defaults. Select Yes to load BIOS
  • Gigabyte GA-F2A75-D3H | User Manual - Page 62
    . If the BIOS update file for your motherboard is not present on the @BIOS server site, please manually download the BIOS update file from GIGABYTE's website and follow the instructions in "Update the BIOS without Using the Internet Update Function" below. 2. Update the BIOS without Using the
  • Gigabyte GA-F2A75-D3H | User Manual - Page 63
    in EasyTune 6 may differ by motherboard model. Grayed-out area(s) indicates that the item is not configurable or the function is not supported. Incorrectly doing overclock/overvoltage may result in damage to the hardware components such as CPU, chipset, and memory and reduce the useful life
  • Gigabyte GA-F2A75-D3H | User Manual - Page 64
    4-3 Q-Share Q-Share is an easy and convenient data sharing tool. After configuring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources. Directions for using Q-Share After installing Q-Share from the
  • Gigabyte GA-F2A75-D3H | User Manual - Page 65
    system from the backup image •• Supported operating systems: Windows 7 and Vista. •• Smart Recovery 2 only supports NTFS file system. •• You the backup and enter the user name and password. Follow the on-screen instructions to complete. Recovering a file: Click the File Recovery button on the main
  • Gigabyte GA-F2A75-D3H | User Manual - Page 66
    proceed with the restore immediately or later. Once you respond "Yes" the system will restart to the Windows recovery environment. Follow the onscreen instructions to restore your system. •• For Windows Vista, refer to the steps below to use the original Windows installation disk for system recovery
  • Gigabyte GA-F2A75-D3H | User Manual - Page 67
    4-5 Auto Green Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver, the system will enter the specified power saving mode. The Configuration
  • Gigabyte GA-F2A75-D3H | User Manual - Page 68
    Unique Features - 68 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 69
    Chapter 5 Appendix 5-1 Configuring SATA Hard Drive(s) RAID Levels RAID 0 Minimum Number of Hard ≥2 Drives Array Capacity Number of hard drives * Size of the smallest drive Fault Tolerance No RAID 1 RAID 10 2 ≥4 Size of the smallest drive Yes (Number of hard drives/2) * Size of the
  • Gigabyte GA-F2A75-D3H | User Manual - Page 70
    B. Configuring SATA controller mode in BIOS Setup Make sure to configure the SATA controller mode correctly in system BIOS Setup. Step 1: Turn on your computer and press to enter BIOS Setup during the POST (Power-On Self-Test). Make sure OnChip SATA Controller is enabled. To enable RAID for
  • Gigabyte GA-F2A75-D3H | User Manual - Page 71
    C. Configuring RAID set in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the installation of Windows operating system for a non-RAID configuration. Step 1: After the POST memory test begins and before the operating system boot begins, look
  • Gigabyte GA-F2A75-D3H | User Manual - Page 72
    Create Arrays Manually To create a new array, press to enter the LD View Menu window (Figure 4). To create an array, press to access the LD Define Menu.
  • Gigabyte GA-F2A75-D3H | User Manual - Page 73
    In the following procedure, we'll create RAID 0 as an example. 1. Under the RAID Mode section, press the key to select RAID 0. 2. Set the Stripe Block size. 64 KB is the default. 3. Under the Drives Assignments section, press the up or down arrow key to highlight a drive. 4. Press the <
  • Gigabyte GA-F2A75-D3H | User Manual - Page 74
    View Drive Assignments The View Drive Assignments option in the Main Menu displays whether the attached hard drives are assigned to a disk array or are unassigned. Under the Assignment column, drives are labeled with their assigned disk array or shown as Free if unassigned. Option ROM Utility (c)
  • Gigabyte GA-F2A75-D3H | User Manual - Page 75
    Driver and Operating System With the correct BIOS settings, you are ready to install Windows 7/Vista/XP. A. Installing Windows 7/Vista (The following instructions use Windows 7 as the example operating system.) Step 1: You need to install the SATA RAID/AHCI driver during the OS installation. Use an
  • Gigabyte GA-F2A75-D3H | User Manual - Page 76
    B. Installing Windows XP Before installing Windows XP, connect a USB floppy disk drive to your computer first because you need to install the SATA RAID/AHCI driver from a floppy disk that contains the driver during the OS installation. Without the driver, the hard drive(s) may not be recognized
  • Gigabyte GA-F2A75-D3H | User Manual - Page 77
    RAID Controller-x86 platform and press . Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the
  • Gigabyte GA-F2A75-D3H | User Manual - Page 78
    Rebuilding an Array: Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only to fault-tolerant arrays such as RAID 1 and RAID 10. To replace the old drive, make sure to use a new drive of equal or greater capacity. The procedures below
  • Gigabyte GA-F2A75-D3H | User Manual - Page 79
    a microphone, connect your microphone to the Mic in jack and manually configure the jack for microphone functionality. •• To configure 4/5.1/7.1-channel audio the back panel audio (only supported when using an HD front panel audio module), refer to instructions on the next page. High Definition
  • Gigabyte GA-F2A75-D3H | User Manual - Page 80
    Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK. Step 3: On the Speakers screen, click the Speaker Configuration tab. In the Speaker Configuration list, select
  • Gigabyte GA-F2A75-D3H | User Manual - Page 81
    5-2-2 Configuring S/PDIF Out The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality. 1. Connecting a S/PDIF Out Cable: Connect a S/PDIF optical cable to the corresponding S/PDIF out connector as shown below and an external decoder for
  • Gigabyte GA-F2A75-D3H | User Manual - Page 82
    5-2-3 Configuring Microphone Recording Step 1: After installing the audio driver, the HD Audio Manager icon will appear in the notification area. Double-click the icon to access the HD Audio Manager. Step 2: Connect your microphone to the Mic in jack (pink) on the back panel or the Mic in jack (
  • Gigabyte GA-F2A75-D3H | User Manual - Page 83
    Step 5: After completing the settings above, click Start, point to All Programs, point to Accessories, and then click Sound Recorder to begin the sound recording. * Enabling Stereo Mix If the HD Audio Manager does not display the recording device you wish to use, refer to the steps below. The
  • Gigabyte GA-F2A75-D3H | User Manual - Page 84
    . Be sure to save the recorded audio file upon completion. B. Playing the Recorded Sound You can play your recording in a digital media player program that supports your audio file format. Appendix - 84 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 85
    Troubleshooting 5-3-1 Frequently Asked Questions To read more FAQs for your motherboard, please go to the Support have this jumper/button, refer to the instructions on the motherboard battery in Chapter 1. only) A: Step 1: First, make sure Service Pack 1 or Service Pack 2 has been installed (check in
  • Gigabyte GA-F2A75-D3H | User Manual - Page 86
    If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. START Turn off memory slot. No Correctly insert the memory into the memory socket. Yes The problem is verified and solved. Insert the graphics card. Connect the ATX main power
  • Gigabyte GA-F2A75-D3H | User Manual - Page 87
    verified and solved. END If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support & Downloads\Technical Support page to submit your question. Our customer service staff will reply you as soon as possible. - 87 - Appendix
  • Gigabyte GA-F2A75-D3H | User Manual - Page 88
    please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we
  • Gigabyte GA-F2A75-D3H | User Manual - Page 89
    - 89 - Appendix
  • Gigabyte GA-F2A75-D3H | User Manual - Page 90
    Appendix - 90 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 91
    - 91 - Appendix
  • Gigabyte GA-F2A75-D3H | User Manual - Page 92
    Appendix - 92 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 93
    - 93 - Appendix
  • Gigabyte GA-F2A75-D3H | User Manual - Page 94
    Appendix - 94 -
  • Gigabyte GA-F2A75-D3H | User Manual - Page 95
    .us •• G.B.T. INC (USA) - Mexico Tel: +1-626-854-9338 x 215 (Soporte de habla hispano) FAX: +1-626-854-9326 Correo: [email protected] Tech. Support: http://rma.gigabyte.us Web address: http://latam.giga-byte.com •• Giga-Byte SINGAPORE PTE. LTD. - Singapore WEB address : http://www.gigabyte.sg
  • Gigabyte GA-F2A75-D3H | User Manual - Page 96
    kz You may go to the GIGABYTE website, select your language in the language list on the top right corner of the website. • GIGABYTE Global Service System To submit a technical or non-technical (Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw Then select your language to enter
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
GA-F2A75-D3H
User's Manual
Rev. 1002
12ME-F275D3H-1002R