Gigabyte GA-GC230D Manual - Page 31

Integrated Peripherals

Get Gigabyte GA-GC230D PDF manuals and user guides View all Gigabyte GA-GC230D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

2-5 Integrated Peripherals ` KLJI On-Chip Primary PCI IDE Enables or disables the first integrated IDE controller. (Default: Enabled) On-Chip SATA Mode Configures the integrated SATA controller. Disabled Disables the integrated SATA controller. Auto Lets BIOS set SATA devices to Combined or Enhanced mode. If your onboard SATA controller is automatically configured to Combined mode, you can manually re-configure it to Enhanced mode as needed. (Default) Combined Sets all SATA devices to operate in PATA mode. Combined allows a maximum of 4 ATA devices to be used simultaneously: two PATA devices plus two SATA devices. Enhanced Sets all SATA devices to operate in SATA mode. Non-Combined Sets all SATA devices to operate in PATA mode and disables the integrated IDE controller. PATA IDE Set to This value is dependent on the On-Chip SATA Mode setting. SATA Port0 Set to This value is dependent on the On-Chip SATA Mode setting. SATA Port1 Set to This value is dependent on the On-Chip SATA Mode setting. - 31 - BIOS Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
- 31 -
BIOS Setup
2-5
Integrated Peripherals
On-Chip Primary PCI IDE
Enables or disables the first integrated IDE controller. (Default: Enabled)
On-Chip SATA Mode
Configures the integrated SATA controller.
Disabled
Disables the integrated SATA controller.
Auto
Lets BIOS set SATA devices to
Combined
or
Enhanced
mode.
If your onboard SATA controller is automatically configured to
Combined
mode, you can manually re-configure it to
Enhanced
mode as needed.
(Default)
Combined
Sets all SATA devices to operate in PATA mode.
Combined
allows a
maximum of 4 ATA devices to be used simultaneously: two PATA devices
plus two SATA devices.
Enhanced
Sets all SATA devices to operate in SATA mode.
Non-Combined
Sets all SATA devices to operate in PATA mode and disables the integrated
IDE controller.
PATA IDE Set to
This value is dependent on the
On-Chip SATA Mode
setting.
SATA Port0 Set to
This value is dependent on the
On-Chip SATA Mode
setting.
SATA Port1 Set to
This value is dependent on the
On-Chip SATA Mode
setting.