Gigabyte GA-H310MSTX-HD3 User Manual - Page 13

M2A M.2 Socket 3 Connector, 7 BATTERY/BAT Battery/Battery Power Cable Connector

Page 13 highlights

F_ B S_ F_ B SS U 123 1 23 1 5) M2A (M.2 Socket 3 Connector) B SS The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs. S 1 S _S _ B S_ 80 B B S 1 23 1 1 23 1 1 23 U _ S_ _ _S _ B_ USB 0_ B Follow the steps below to cSoBr_rectly install an M.2 SSD in the M.2 connector. B Step 1: S S Use a screw driver to unfasten the screw from the motherboard. Step 2: Slide the M.2 SSD into theF c_oSnnector at an angle. Step 3: S_ _ Press the M.2 SSD down andB then secure it with the screw. _U _ __ 3 B F _0 F_USB3 F _0 _ _B __ F S_ 6/7) BATTERY/BAT (Battery/Battery Power Cable Connector) The battery provides power to keep the values (such as BIOS configu_raFtions, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. _ 0 YouFmay clear the CMOS values by removi_n0g thFe battery cable: 1. Turn off your computer and unplug the power cord. 2. Unplug the the battery cable from the battery cable header and wait for one minute. 3. Plug in the battery cable. S F_ 4. Plug in the power cord and restart your computer. B2(-) Pin No. Definition 1(+) RTC Power 1(+) 2(-) GND _3 U •• Always turn off your computer and unplug the power cord before replacing the battery. •• Replace the battery with an equivalent one. Damage to your devices may occur if the battery is replaced with an incorrect model. •• F_USB3 ContacF_tU_tS3hB3e0 3placUe of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model. •• Used batteries must be handled in accordance with local environmental regulations. - 13 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

5)
M2A (M.2 Socket 3 Connector)
The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs.
80
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Use a screw driver to unfasten the screw from the motherboard.
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it with the screw.
Pin No.
Definition
1(+)
RTC Power
2(-)
GND
6/7) BATTERY/BAT (Battery/Battery Power Cable Connector)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low
level, or the CMOS values may not be accurate or may be lost.
You may clear the CMOS values by removing the battery cable:
1. Turn off your computer and unplug the power cord.
2. Unplug the the battery cable from the battery cable header and wait for one
minute.
3. Plug in the battery cable.
4. Plug in the power cord and restart your computer.
Always turn off your computer and unplug the power cord before replacing the battery.
Replace the battery with an equivalent one. Damage to your devices may occur if the battery is
replaced with an incorrect model.
Contact the place of purchase or local dealer if you are not able to replace the battery by yourself
or uncertain about the battery model.
Used batteries must be handled in accordance with local environmental regulations.
2(-)
1(+)
- 13 -