Gigabyte GA-H61M-S2P Manual - Page 32

Power Management, Internal Graphics Memory Size

Page 32 highlights

&& Internal Graphics Memory Size Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M) && DVMT Total Memory Size Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX. (Default: MAX) && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Enabled) && USB Storage Devices Displays a list of connected USB mass storage devices. You can configure how each device is going to be treated. For example, you can emulate a USB flash drive as a floppy disk drive. (Default: Auto) `` Super IO Configuration `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port and parallel port. && Serial Port A Enables or disables the onboard serial port. (Default: Enabled) && Parallel Port Enables or disables the onboard parallel port. (Default: Enabled) - 32 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

- 32 -
Internal Graphics Memory Size
&
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)
DVMT Total Memory Size
&
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)
Legacy USB Support
&
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
EHCI Hand-off
&
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
Port 60/64 Emulation
&
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Enabled)
USB Storage Devices
&
Displays a list of connected USB mass storage devices. You can configure how each device is going to be
treated. For example, you can emulate a USB flash drive as a floppy disk drive. (Default: Auto)
Super IO Configuration
`
Super IO Configuration
`
This section provides information on the super I/O chip and allows you to configure the serial port and
parallel port.
Serial Port A
&
Enables or disables the onboard serial port. (Default: Enabled)
Parallel Port
&
Enables or disables the onboard parallel port. (Default: Enabled)