Gigabyte GA-H61MA-D3V Manual - Page 16
GSATA3 0/1 SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 Chip - raid
View all Gigabyte GA-H61MA-D3V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
DEBUG PORT DEBUG PORT 6) GSATA3 0/1 (SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 Chip) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Marvell 88SE9172 chip supports RAID 0 and RAID 1. Refer to Chapter 4, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. GSATA3 Pin No. Definition 1 GND 7 1 2 TXP 10 3 TXN 4 GND 5 RXN 6 RXP 7 GND Please connect the L-shaped end of the SATA cable to your SATA hard drive. A RAID 0 or RAID 1 configuration requires two hard drives. - 16 -
- 16 -
1
0
GSATA3
1
7
6)
GSATA3 0/1 (SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 Chip)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Marvell 88SE9172 chip
supports RAID 0 and RAID 1. Refer to Chapter 4, "Configuring SATA Hard Drive(s)," for instructions on
configuring a RAID array.
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
A RAID 0 or RAID 1 configuration requires two hard drives.
Please connect the L-shaped end of
the SATA cable to your SATA hard
drive.