Gigabyte GA-H67A-USB3-B3 Manual - Page 39

tFAW Options are: Auto (default), 1~63. Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc Timing Control IO Latency Options are: Auto (default), 1~31. Round Trip Latency Options are: Auto (default), 1~255.  Advanced Voltage Settings CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Advanced Voltage Settings ****** Mother Board Voltage Control ****** Voltage Types Normal Current >>> CPU Load-Line Calibration [Auto] CPU Vcore 1.180V [Auto] x Dynamic Vcore(DVID) +0.000V Auto QPI/Vtt Voltage 1.050V [Auto] Graphics Core 1.015V [Auto] x Graphics DVID +0.000V Auto >>> MCH/ICH PCH Core 1.050V [Auto] CPU PLL 1.800V [Auto] Item Help Menu Level  DRAM Voltage DRAM Termination Ch-A Data VRef. Ch-B Data VRef. Ch-A Address VRef. Ch-B Address VRef. Move Enter: Select F5: Previous Values 1.500V 0.750V 0.750V 0.750V 0.750V 0.750V [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults >>> CPU Load-Line Calibration Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En- abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load. (Default: Auto) Standard Disables Load-Line Calibration and sets VDroop following Intel specifications. Level 1 Enables Load-Line Calibration and slightly adjusts VDroop. Level 2 Enables Load-Line Calibration and moderately adjusts VDroop. Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU. CPU Vcore The default is Auto. Dynamic Vcore(DVID) This option is configurable only when CPU Vcore is set to Normal. The default is Auto. QPI/Vtt Voltage The default is Auto. Graphics Core The default is Auto. Graphics DVID This option is configurable only when Graphics Core is set to Normal. The default is Auto. - 39 - BIOS Setup