Gigabyte GA-H87N User Manual - Page 21
Back Panel Connectors, USB 2.0/1.1 Port, PS/2 Keyboard/Mouse Port, HDMI Port, Antenna Connector
View all Gigabyte GA-H87N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1-6 Back Panel Connectors jk USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. PS/2 Keyboard/Mouse Port Use this port to connect a PS/2 mouse or keyboard. HDMI Port The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is 4096x2160, but the actual resolutions supported are dependent on the monitor being used. After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The item name may differ depending on your operating system. The screenshot below is from Windows 8.) In Windows 8, select Start>Control Panel>Hardware and Sound>Sound>Playback, set Intel(R) Display Audio to the default playback device. Antenna Connectorjk Use this connector to connect an antenna. Tighten the antenna cables to the antenna connectors and then move the antenna to a place where the signal is good. MM Only for GA-Z87N-WIFI. NN Only for GA-H87N-WIFI. - 21 - Hardware Installation