Gigabyte GA-H97M-D3HP User Manual - Page 9

Storage Interface ŠŠ USB ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ Back Panel ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Chipset: - 1 x M.2 PCIe connector - 1 x SATA Express connector - 6 x SATA 6Gb/s connectors (M.2, SATA Express, and SATA3 4/5 connectors can only be used one at a time.) - Support for RAID 0, RAID 1, RAID 5, and RAID 10 Chipset: - 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through the internal USB header) - 8 x USB 2.0/1.1 ports (2 ports on the back panel, 6 ports available through the internal USB headers) 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x M.2 PCIe connector 1 x SATA Express connector 6 x SATA 6Gb/s connectors 1 x CPU fan header 3 x system fan headers 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.0/2.0 header 3 x USB 2.0/1.1 headers 1 x serial port header 1 x parallel port header 1 x Clear CMOS jumper 1 x Trusted Platform Module (TPM) header 1 x PS/2 keyboard/mouse port 1 x D-Sub port 1 x DVI-D port 1 x HDMI port 4 x USB 3.0/2.0 ports 2 x USB 2.0/1.1 ports 1 x RJ-45 port 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In) I/O Controller Hardware Monitor BIOS ŠŠ iTE® I/O Controller Chip ŠŠ System voltage detection ŠŠ CPU/System temperature detection ŠŠ CPU/System fan speed detection ŠŠ CPU/System overheating warning ŠŠ CPU/System fan fail warning ŠŠ CPU/System fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. ŠŠ 2 x 64 Mbit flash ŠŠ Use of licensed AMI UEFI BIOS ŠŠ Support for DualBIOS™ ŠŠ PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 - 9 -