Gigabyte GA-K8N Pro User Manual - Page 46
Boot Up Floppy Seek, Password Check, Flexible AGP 8X, Init Display First
View all Gigabyte GA-K8N Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
English USB-ZIP USB-CDROM USB-HDD LAN Disabled Select your boot device priority by USB-ZIP. Select your boot device priority by USB-CDROM. Select your boot device priority by USB-HDD. Select your boot device priority by LAN. Select your boot device priority by Disabled. Boot Up Floppy Seek During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks. Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80tracks. Disabled BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360K. (Default value) Password Check 8Setup The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) 8System The system will not boot and will not access to Setup page if the correct password is not entered at the prompt. Flexible AGP 8X Auto Automatically set AGP transfer rate according to AGP compatibility and stability. (Default value) 8X Always set AGP transfer rate to 8X mode if the 8X mode supported by the AGP card. 4X Set AGP transfer rate to 4X mode no matter what the AGP transfer rate the card is. Init Display First This feature allows you to select the first initiation of the monitor display from which card when you install an AGP card and a PCI VGA card on board. PCI slot Set initial display first to PCI slot. (Default value) Onboard/AGP Set initial display first to AGP. GA-K8N Pro Motherboard K8n pro_1001_b.p65 46 - 46 - 2003/8/18, ¤U¤È 06:08