Gigabyte GA-K8NSC-939 User Manual - Page 67
used, RAID Mode, Striping Width, Disk Model Name, and disk capacity. - drivers windows 7
View all Gigabyte GA-K8NSC-939 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
English Press Enter to view and verify details. The Array Detail screen appears. The Array Detail screen shows various information about the array that you selected, such as Striping Block used, RAID Mode, Striping Width, Disk Model Name, and disk capacity. RAID Mode: Mirroring Striping Width : 1 Array 2 : NVIDIA MIRROR 111.79G - Array Detail - Striping Block: Adapt 1 1 Channel M/S 0 Master 1 Master Index 0 1 Disk Model Name ST3120026AS ST3120026AS Capacity 111.79GB 111.79GB [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return If you want to mark this disk as empty and wipe out all its contents, press C. At the prompt, press Y to wipe out all the data, otherwise press N. Press Enter again to go back to the previous screen and then press Ctrl + X to exit the RAID setup. Now that the RAID setup has been configured from the RAID BIOS, the next step is to configure and load drivers under Windows. - 67 - Appendix