Gigabyte GA-K8VT800 User Manual - Page 35

English 2-3 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals IDE DMA transfer access OnChip IDE Channel 0 OnChip IDE Channel 1 OnChip Serial ATA SATA Mode AC97 Audio USB 1.1 Controller USB 2.0 Controller USB Keyboard Support USB Mouse Support Onboard H/W LAN OnBoard LAN Boot ROM Onboard FDC Controller Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select x UR2 Duplex Mode Onboard Parallel Port Parallel Port Mode Midi Port Address x Midi Port IRQ [Enabled] [Enabled] [Enabled] [Enabled] [RAID] [Auto] [Enabled] [Enabled] [Disabled] [Disabled] [Enabled] [Disabled] [Enabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] Half [378/IRQ7] [SPP] [Disabled] 10 Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save ESC: Exit F6: Fail-Safe Defaults F7: Optimized Defaults F1: General Help IDE DMA transfer access Enabled Disabled Enable IDE DMA transfer access. (Default value) Disable this function. OnChip IDE Channel0 Enabled Enable onboard 1st channel IDE port.(Default value) Disabled Disable onboard 1st channel IDE port. OnChip IDE Channel1 Enabled Enable onboard 2nd channel IDE port.(Default value) Disabled Disable onboard 2nd channel IDE port. OnChip Serial ATA Enabled Enable VT8237R / VT8237R+ Serial ATA support.(Default value) Disabled Disable this function. SATA Mode RAID Set onboard SATA mode to RAID.(Default value) IDE Set onboard SATA mode to IDE. AC97 Audio Auto Disabled Autodetect onboard AC'97 audio function. (Default value) Disable this function. USB 1.1 Controller Disabled Disable USB 1.1 controller. Enabled Enable USB 1.1 controller. (Default value) - 35 - BIOS Setup