Gigabyte GA-M61PM-S2 Manual - Page 36

English 2-3 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Integrated Peripherals ` Serial-ATA RAID Config On-Chip IDE Channel0 On-Chip MAC Lan NV Serial-ATA Controller IDE Prefetch Mode USB Memory Type Onboard Audio Function Onboard 1394 ` SMART LAN Onboard LAN Boot ROM Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA On-Chip USB USB Keyboard Support USB Mouse Support Legacy USB storage detect [Press Enter] [Enabled] [Auto] [All Enabled] [Enabled] [SHADOW] [Auto] [Enabled] [Press Enter] [Disabled] [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [SPP] 3 [V1.1+V2.0) [Disabled] [Disabled] [Enabled] Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Serial-ATA RAID Config CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Serial-ATA RAID Config NV SATA RAID function x NV SATA 1 Primary RAID x NV SATA 1 Secondary RAID x NV SATA 2 Primary RAID x NV SATA 2 Secondary RAID [Disabled] Enabled Enabled Enabled Enabled Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults NV SATA RAID function Enabled Disabled Allows users to configure individual SATA channels as RAID or ATA mode. Disable the RAID function for all of the onboard SATA channels. (Default value) NV SATA 1 Primary RAID Enabled Enable RAID function for the first channel of the first SATA 3Gb/s controller. (Default value) Disabled Disable this function. NV SATA 1 Secondary RAID Enabled Enable RAID function for the second channel of the first SATA 3Gb/s controller. Disabled (Default value) Disable this function. GA-M61PM-S2 (rev. 2.0) Motherboard - 36 -