Gigabyte GA-MA78G-DS3HP Manual - Page 45
Internal Graphics Mode, UMA Frame Buffer Size, Surround View, Onboard VGA output connect
View all Gigabyte GA-MA78G-DS3HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2-5 Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced BIOS Features Internal Graphics Mode UMA Frame Buffer Size x Surround View Onboard VGA output connect Init Display First Virtualization Patch AMD TLB Erratum (Note) AMD K8 Cool&Quiet control ` Hard Disk Boot Priority First Boot Device Second Boot Device Third Boot Device Password Check HDD S.M.A.R.T. Capability Away Mode Full Screen LOGO Show Dual BIOS Recovery Source [UMA] [Auto] Disabled [Auto] [PCI Slot] [Disabled] [Enabled] [Auto] [Press Enter] [Floppy] [Hard Disk] [CDROM] [Setup] [Disabled] [Disabled] [Enabled] [HPA] Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Internal Graphics Mode Allows you to determine whether to allocate the system memory for the onboard graphics controller. UMA Disabled Allocates memory for the onboard graphics controller from the system memory. (Default) Disables the onboard graphics controller. UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB, 256MB, 512MB. Surround View This option is configurable only when Init Display First is set to PEG. Enables or disables the Surround View function. This option is configurable only if an ATI graphics card is installed. (Default: Disabled) Onboard VGA output connect Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI. Auto BIOS automatically determines the primary display port for output, depending on to which port the display device is connected, D-SUB/DVI-D or D-SUB/HDMI. (Default) D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display. D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display. (Note) This item is present only if you install a CPU that supports this feature. - 45 - BIOS Setup