Gigabyte GA-MA78GM-S2HP Manual - Page 37
HT Link Frequency, VGA Core Clock control, VGA Core Clock Mhz, CPU Clock Ratio, CPU NorthBridge Freq - overclock
View all Gigabyte GA-MA78GM-S2HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2008 Award Software MB Intelligent Tweaker(M.I.T.) HT Link Frequency VGA Core Clock control x VGA Core Clock (Mhz) CPU Clock Ratio CPU NorthBridge Freq. (Note) CPU Host Clock Control x CPU Frequency (MHz) PCIE Clock (MHz) Set Memory Clock x Memory Clock DCTs Mode (Note) ******** System Voltage Optimized System Voltage Control x DDR2 Voltage Control x NorthBridge Volt Control x SouthBridge Volt Control x CPU NB VID Control (Note) x CPU Voltage Control Normal CPU Vcore ******** [Auto] [Disabled] 500 [Auto] [Auto] [Auto] 200 [Auto] [Auto] DDR 533 [Unganged] [Auto] Normal Normal Normal Normal Normal 1.1000V Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults • Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately alter ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) • When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. HT Link Frequency Allows you to manually set the frequency for the HT Link between the CPU and chipset. Auto BIOS will automatically adjust the HT Link Frequency. (Default) 200 MHz~2.6 GHz Sets HT Link Frequency to 200 MHz~2.6 GHz. VGA Core Clock control Enables or disables the control of VGA Core clock. VGA Core Clock (Mhz) Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz. This item is configurable only if the VGA Core Clock control option is enabled. (Default: 500) CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used. CPU NorthBridge Freq. (Note) Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is dependent on the CPU being used. (Note) This item is present only if you install a CPU that supports this feature. - 37 - BIOS Setup