Gigabyte GA-MA78LMT-S2 Manual - Page 39
RAS to CAS R/W Delay
UPC - 818313009463
View all Gigabyte GA-MA78LMT-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2009 Award Software DRAM Configuration DCTs Mode (Note) DDR3 Timing Items x CAS# latency x RAS to CAS R/W Delay x Row Precharge Time x Minimum RAS Active Time x 1T/2T Command Timing x TwTr Command Delay x Trfc0 for DIMM1 x Trfc2 for DIMM2 x Write Recovery Time x Precharge Time x Row Cycle Time x RAS to RAS Delay Bank Interleaving Channel interleave DQS Training Control Memclock tri-stating [Unganged] [Auto] Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto [Enabled] [Enabled] [Skip DQS] [Disabled] SPD 9T 9T 9T 24T -5T 105ns -10T 5T 33T 4T Auto 9T 9T 9T 24T -5T 105ns -10T 5T 33T 4T Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults DCTs Mode (Note) Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. (Default) DDR3 Timing Items Manual allows all DDR3 Timing items below to be configurable. Options are: Auto (default), Manual. CAS# latency Options are: Auto (default), 4T~12T. RAS to CAS R/W Delay Options are: Auto (default), 5T~12T. Row Precharge Time Options are: Auto (default), 5T~12T. Minimum RAS Active Time Options are: Auto (default), 15T~30T. 1T/2T Command Timing Options are: Auto (default), 1T, 2T. TwTr Command Delay Options are: Auto (default), 4T~7T. Trfc0 for DIMM1 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. Trfc2 for DIMM2 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. (Note) This item appears only if you install a CPU that supports this feature. - 39 - BIOS Setup