Gigabyte GA-N3050N-D2P User Manual - Page 6

Product Specifications, Support for DDR3/DDR3L 1600/1333 MHz memory modules

Page 6 highlights

1-2 Product Specifications CPU Memory Onboard Graphics Audio LAN ŠŠ Built in with an Intel® Dual-Core Celeron® N3050 SoC (1.6 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components. ŠŠ 2 MB Cache ŠŠ 2 x DDR3 DIMM sockets supporting up to 8 GB of system memory * If only one memory is to be installed, be sure to install it in the DDR3_1 slot. ŠŠ Dual channel memory architecture ŠŠ Support for DDR3/DDR3L 1600/1333 MHz memory modules * Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded to 1066 MHz. ŠŠ Support for non-ECC memory modules ŠŠ Integrated in the SoC: - 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz - 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz * Support for HDMI 1.4 version. ŠŠ Maximum shared memory of 512 MB ŠŠ Realtek® ALC887 codec ŠŠ High Definition Audio ŠŠ 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. ŠŠ Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots ŠŠ 1 x PCI slot Storage Interface ŠŠ USB ŠŠ ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Chipset: - 2 x SATA 6Gb/s connectors Integrated in the SoC: - 4 x USB 3.0/2.0 ports on the back panel SoC+GENESYS LOGIC USB 2.0 Hub: - 4 x USB 2.0/1.1 ports (available through the internal USB headers) 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 2 x SATA 6Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 2 x USB 2.0/1.1 headers 1 x serial port header 1 x speaker header 1 x Clear CMOS jumper 1 x chassis intrusion header - 6 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

- 6 -
1-2
Product Specifications
CPU
²
Built in with an Intel
®
Dual-Core Celeron
®
N3050 SoC (1.6 GHz)
*
Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
to these components.
²
2 MB Cache
Memory
²
2 x DDR3 DIMM sockets supporting up to 8 GB of system memory
*
If only one memory is to be installed, be sure to install it in the DDR3_1 slot.
²
Dual channel memory architecture
²
Support for DDR3/DDR3L 1600/1333 MHz memory modules
*
Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded
to 1066 MHz.
²
Support for non-ECC memory modules
Onboard
Graphics
²
Integrated in the SoC:
-
1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
-
1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
*
Support for HDMI 1.4 version.
²
Maximum shared memory of 512 MB
Audio
²
Realtek
®
ALC887 codec
²
High Definition Audio
²
2/4/5.1/7.1-channel
*
To configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
LAN
²
Realtek
®
GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
²
1 x PCI slot
Storage Interface
²
Chipset:
-
2 x SATA 6Gb/s connectors
USB
²
Integrated in the SoC:
-
4 x USB 3.0/2.0 ports on the back panel
²
SoC+GENESYS LOGIC USB 2.0 Hub:
-
4 x USB 2.0/1.1 ports (available through the internal USB headers)
Internal
Connectors
²
1 x 24-pin ATX main power connector
²
1 x 4-pin ATX 12V power connector
²
2 x SATA 6Gb/s connectors
²
1 x CPU fan header
²
1 x system fan header
²
1 x front panel header
²
1 x front panel audio header
²
2 x USB 2.0/1.1 headers
²
1 x serial port header
²
1 x speaker header
²
1 x Clear CMOS jumper
²
1 x chassis intrusion header