Gigabyte GA-P43-ES3G Manual - Page 37

(G)MCH Frequency Latch Allows you to fix the chipset frequency at system bootup. Options for adjusting memory multiplier below may differ according to the fixed frequency. Options are: Auto (default), 200MHz, 266MHz, 333MHz, 400MHz. System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Options are dependent on CPU FSB and the (G)MCH Frequency Latch settings. Auto sets memory multiplier according to memory SPD data. (Default: Auto) Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the CPU Host Frequency (Mhz) and System Memory Multiplier settings. DRAM Timing Selectable (SPD) Manual allows all DRAM timing control items below to be configurable. Options are: Auto (default), Manual. >>>>> Standard Timing Control CAS Latency Time Options are: Auto (default), 3~7. tRCD Options are: Auto (default), 1~15. tRP Options are: Auto (default), 1~15. tRAS Options are: Auto (default), 1~63. ******** Advanced Timing Control ******** Advanced Timing Control CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced Timing Control x tRRD x tWTR x tWR x tRFC x tRTP x Command Rate (CMD) 2 Auto 2 Auto 4 Auto 28 Auto 2 Auto 0 Auto Item Help Menu Level` >>>>> Channel A ` Channel A Timing Settings ` Channel A Driving Settings [Press Enter] [Press Enter] >>>>> Channel B ` Channel B Timing Settings ` Channel B Driving Settings [Press Enter] [Press Enter] KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults tRRD Options are: Auto (default), 1~15. - 37 - ESC: Exit F1: General Help F7: Optimized Defaults BIOS Setup