Gigabyte GA-PA65-UD3-B3 Manual - Page 49
GSATA3 Ctrl Mode Marvell 88SE9172 Chip, GSATA3_4 and GSATA3_5 connectors
View all Gigabyte GA-PA65-UD3-B3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
GSATA3 Controller (Marvell 88SE9172 Chip, GSATA3_4 and GSATA3_5 connectors) Enables or disables the SATA controller integrated in the Marvell 88SE9172 chip. (Default: Enabled) GSATA3 Ctrl Mode (Marvell 88SE9172 Chip, GSATA3_4 and GSATA3_5 connectors) Enables or disables RAID for the SATA controller integrated in the Marvell 88SE9172 chip or configures the SATA controller to AHCI mode. IDE Configures the SATA controller to IDE mode. (Default) AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. RAID Enables RAID for the SATA controllers. Onboard Serial Port 1 Enables or disables the serial port and specifies its base I/O address and corresponding interrupt. Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled. - 49 - BIOS Setup