Gigabyte GA-PH67A-UD3-B3 Manual - Page 47
Onboard USB 3.0 Controller Renesas D720200 USB 3.0 Controller, on the Back Panel
View all Gigabyte GA-PH67A-UD3-B3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
When a Cable Problem Occurs... If a cable problem occurs on a specified pair of wires, the Status field will show Short and then length shown will be the approximate distance to the fault or short. Example: Part1-2 Status = Short / Length = 2m Explanation: A fault or short might occur at about 2m on Part 1-2. Note: Part 4-5 and Part 7-8 are not used in a 10/100 Mbps environment, so their Status fields will show Open, and the length shown is the approximate length of the attached LAN cable. Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) Onboard USB 3.0 Controller (Renesas D720200 USB 3.0 Controller, on the Back Panel)jk Enables or disables the Renesas D720200 USB 3.0 controller. (Default: Enabled) USB3.0 Turbo (Renesas D720200 USB 3.0 Controller, on the Back Panel)jk Enables or disables the Turbo USB mode for the Renesas D720200 USB 3.0 controller. The actual performance may vary depending on the number of devices being installed. (Default: Disabled) Onboard Serial Port 1 Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. Options are:Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled. j Only for GA-P67A-UD3-B3 k Only for GA-PH67A-UD3-B3 - 47 - BIOS Setup