Gigabyte GA-Q87N User Manual - Page 30

Power Management, Power Loading, Resume by Alarm, Wake on LAN, RC6Render Standby

Page 30 highlights

`` Serial Port Console Redirection This section allows you to enable/disable serial port console redirection for remote server management through a serial port. `` Intel(R) Ethernet Network Connection i217L This sub-menu provides information on LAN configuration. 2-6 Power Management && Power Loading Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configure this setting. (Default: Auto) && Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month. Wake up hour/minute/second: Set the time at which the system will be powered on automatically. Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective. && Wake on LAN Enables or disables the wake on LAN function. (Default: Enabled) && Soft-Off by PWR-BTTN Configures the way to turn off the computer in MS-DOS mode using the power button. Instant-Off Press the power button and then the system will be turned off instantly. (Default) Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power button is pressed for less than 4 seconds, the system will enter suspend mode. && RC6(Render Standby) Allows you to determine whether to let the onboard graphics enter standby mode to decrease power consumption. (Default: Disabled) - 30 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

- 30 -
2-6
Power Management
&
Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to
Enabled
.
Auto
lets the BIOS automatically configure this
setting. (Default: Auto)
&
Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
±
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
±
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
&
Wake on LAN
Enables or disables the wake on LAN function. (Default: Enabled)
&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
±
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
±
Delay 4 Sec.
Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
&
RC6(Render Standby)
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
consumption. (Default: Disabled)
`
Serial Port Console Redirection
This section allows you to enable/disable serial port console redirection for remote server management
through a serial port.
`
Intel(R) Ethernet Network Connection i217L
This sub-menu provides information on LAN configuration.