Gigabyte GA-X48T-DQ6 Manual - Page 2
Teaming needs to set three parts, select adapters at least two adpaters, select teaming mode
View all Gigabyte GA-X48T-DQ6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
(iii) Teaming needs to set three parts 1. select adapters (at least two adpaters) 2. select teaming mode There are three teaming modes for user choosing. (Default = 802.3ad) (1) General Switch Mode This mode is supported to general switch (without teaming function swtich). (2) FEC/GEC The mode needs the switch supports FEC/GEC. So, the switch has to setup FEC/GEC mode and which ports are using for teaming. (3) Link Aggregation \ LACP (802.3ad) The mode needs switch support LACP. LACP is similar with FEC/GEC. But LACP doesn't setup which ports are using for teaming. LACP negotiates the ports with the switch that will make up the team.
(iii)
Teaming needs to set three parts
1.
select adapters (at least two adpaters)
2.
select teaming mode
There are three teaming modes for user choosing. (Default = 802.3ad)
(1)
General Switch Mode
This mode is supported to general switch (without teaming function swtich).
(2)
FEC/GEC
The mode needs the switch supports FEC/GEC. So, the switch has to setup
FEC/GEC mode and which ports are using for teaming.
(3)
Link Aggregation \ LACP (802.3ad)
The mode needs switch support LACP. LACP is similar with FEC/GEC. But LACP
doesn’t setup which ports are using for teaming. LACP negotiates the ports with the
switch that will make up the team.